John,
Open up the writelog.ini file. Under [Multipliers] you will see
CallPrefix=ZL1BHQ. Change that call to ZM1A and be sure to use all caps when
ever putting a call in the .ini file.
It works for me when using another call in USA or as TI5N.
73 Phil N0KE
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of John and Mary
Powell
Sent: Wednesday, February 16, 2005 12:31 AM
To: Writelog
Subject: [WriteLog] CALLSIGN CHANGE - ANOTHER CALLSIGN TO BE USED
Hi all.
A problem - I along with Ken, ZL1AIH, will be operating from ZM1A in the
coming ARRL CW Contest. We are using Writelog (for the first time), my
Notebook computers being employed. The problem is the callsign that appears
on all documentation and setup/configuration is mine (it is my WL programme
that we are using). I have searched the WL documentation in an effort to
determine procedures to alter the setup details so that ZM1A is correctly
installed in the callsign details. I guess the details are there somewhere,
but I was unable to locate them. I assume the time we have spent resolving
antennae interaction issues with our low band antennae may have used up all
the gas that drives the upstairs department !.
Any helpful hints will be appreciated and look for us (ZM1A) as a
MultiSingle in the contest.
73 and Good Luck
John Powell. ZL1BHQ
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|