I've had the very same problem, John. I tried using a PC control/CW cable
but ran into the stuttering problem. I've since bought and built a Winkey
kit which solves it.
BTW I also use 10.53E.
73,
Korey
KA5VCQ/YI9VCQ
----- Original Message -----
From: "John Muzyka" <g4rcg@yahoo.co.uk>
To: <writelog@contesting.com>
Sent: Monday, May 09, 2005 4:02 PM
Subject: [WriteLog] Slurring Characters
> Hi All
> I was using V10.53E in the ARI contest this w/e and started off by using
the Microham USB unit to key the rig, which it started off ok, BUT after a
short while it started send at random just jiberish cw, so I hurridly
changed it to use my Winkey (reconfigured WL setup) and this was ok apart
from slurring characters that occured when the rig was sending and when I
was going between the entry fields of the log, this carried on most of the
time, My Pc is not a laptop (I got the microham for the laptop but the xyl
was doing a project on it) its an AMD 2600 with 512 meg of ram, the only
other thing running at the time was DX summitt.
> Did anyone else have any problems or was it just me??
> Cheers
> John G4RCG
>
>
> ---------------------------------
> Yahoo! Messenger - want a free & easy way to contact your friends
online?
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|