WriteLog
[Top] [All Lists]

Re: [WriteLog] [microHAM] mH Keyer and Writelog Problem

To: <microHAM@yahoogroups.com>,"'Writelog Reflector'" <writelog@contesting.com>
Subject: Re: [WriteLog] [microHAM] mH Keyer and Writelog Problem
From: "G3SJJ" <g3sjj@btinternet.com>
Date: Tue, 9 Aug 2005 22:42:42 +0100
List-post: <mailto:writelog@contesting.com>
Thanks Kevin, but we are 100% certain the loss of rig control and keying is
not RF because we can get the faults without applying RF.   Chris G3SJJ


-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Kevin J. Rowett
Sent: 09 August 2005 22:22
To: microHAM@yahoogroups.com; 'Writelog Reflector'
Subject: Re: [WriteLog] [microHAM] mH Keyer and Writelog Problem


Chris,

I have experienced the exact same items you have.  The radio used
in my configuration is a ICOM 756PROIII.

Powering down the radio did restore the rig control.  However,
powering down the radio wipped out the winkey config set by WL.

Fixing that required restarting WL.  Big hit to contest performance. :-(.

I'm positive my problem is RF getting into the MHK.  I've put ferrite
cores on the USB cable - that helped quite a bit - didn't solve the
problem though.

I'm still trying to find where RF is getting into the equipment.

-KR- N6RCE


-----Original Message-----
From: microHAM@yahoogroups.com [mailto:microHAM@yahoogroups.com] On Behalf
Of G3SJJ
Sent: Tuesday, August 09, 2005 1:57 PM
To: microHAM@yahoogroups. com; Writelog Reflector
Subject: [microHAM] mH Keyer and Writelog Problem


We experienced a problem at GU8D during the IOTA Contest which caused us to
lose considerable operating time on both our Run and our Mult station. I am
bringing it to the attention of both Groups to highlight a potential bug and
to ask if anyone else has seen the fault.

Several times "Rig Control" was lost and at the same time, if we were using
CW then keying from Winkey would go crazy ie the message would be sent but
everything in dots, no dashes, this was true for both F Key and paddle
messages. Switching off the radio, which also powered Keyer or closing down
and re-opening Router did not correct the fault. The only way to recover was
to close Writelog and re-open it.

I have since checked on my computer at home and have seen the same problem.
I have not experienced this before so wonder if it is specific to Router
v2.14 & WinKey when used with Writelog.

There was some instability on the WL network which we have never experienced
before but we think this is a separate problem possibly connected with RFI.
The Router problems is definitely not RFI as it happens when no signal is
being transmitted.

Run station was FT1000MP, Mult was FT1k MK5. Each with its own mH Keyer.
Five laptops networked via WiFi.

Chris G3SJJ
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.4 - Release Date: 09-08-05


[Non-text portions of this message have been removed]




Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/microHAM/

<*> To unsubscribe from this group, send an email to:
    microHAM-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/






_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.4 - Release Date: 09-08-05

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.4 - Release Date: 09-08-05

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
<Prev in Thread] Current Thread [Next in Thread>