Thanks to all re FT-2000 and WL. Thought it might
work with ftdx-9000 settings.
73,s
Lee, N5PO
--- "Joe Subich, W4TV" <w4tv@subich.com> wrote:
>
> Lee,
>
> The FT-2000 works using the FTdx-9000 settings with
> the microKEYER.
>
> It also works (I have just confirmed it) with a
> straight DB9F-DB9F
> serial cable and a conventional 8250 compatible
> serial port.
>
> Set the "Baud Rate" to 4800 unless you change it in
> the FT-2000.
>
> 73,
>
> ... Joe Subich, W4TV
> microHAM America
> http://www.microHAM-USA.com
> http://groups.yahoo.com/group/microHAM
> support@microham.com
>
>
>
> > -----Original Message-----
> > From: writelog-bounces@contesting.com
> > [mailto:writelog-bounces@contesting.com] On Behalf
> Of Lee, N5PO
> > Sent: Friday, November 24, 2006 8:18 AM
> > To: writelog@contesting.com
> > Subject: [WriteLog] FT-2000
> >
> >
> > Anyone using a FT-2000 with WL? Since the 2000 is
> not
> > listed as a supported radio, which supported Yaesu
> > radio would be best to emulate, if any???
> >
> > Thanks,
> >
> > Lee, N5PO
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|