Hey George, thanks for the help!
Unfortunately, this did not seem to resolve the problem.
I changed the control to Com2 (made sure the baud rate were the same) and moved
the
WinKey to Com4...
No real change.
However I did notice that I don't get a orange led on the MK. In fact until I
hit a function key
or key the mic I don't get any led indication. When I hit a function key, I
get a red led on both
the CW/RTTY and PTT1/PTT2...
On the Router, I do get an indication on the port page that it is reading the
frequency from the
IC706MKII (no G on this model). When I hit the WinKey TEST button, I get the
TEST in
CW.. So it seems that Router is working fine.
Any suggestions?
Jim/KC4HW
On 28 Apr 2007 at 17:50, George Tuncil wrote:
> Hello Jim. I have a MK also and have used it with my IC 706. Make
> sure that the supplied cable set is connected in accordance with the
> manual's instruction sequence. The orange LED on the MK front panel
> will tell you this. Once you select the 706 in the MK and verify that
> both are set for 9600 baud and then select COM 2 for rig control, you
> should be reading the frequency directly on the MK Router tab. If
> this is the case, Writelog should follow directly if COM 2 is chosen
> for the rig (select the 706 in Writelog in the port settings). The MK
> preset template for the 706 using Writelog should show this. Just
> make your COM 4 Winkey settings between the Router and Writelog, and
> you should be in business for phone and CW.
>
> I hope that this helps. If not, send me an E mail and we will see what
> else we can try.
>
> Good luck and I hope to hear you on the bands.
>
> George Tuncil W6AEA
> w6aea@msn.com
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.467 / Virus Database: 269.6.1/778 - Release Date:
> 4/27/2007 1:39 PM
>
Jim/KC4HW
http://www.AlabamaContestGroup.org
http://www.AlabamaQSOParty.org (June 2nd and 3rd, 2007)
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|