Jim,
Do you have the correct CI-V address set in WriteLog and the
IC-706mkII? If I recall correctly (and I'm not an Icom user)
you will need to set an address override for the IC-706mkII
if you are using the stock IC-706 driver.
The IC-706 uses CI-V address 48h
The IC-706mkII uses CI-V address 4Eh
The IC-706mkIIg uses CI-V address 58h
Since microHAM Router is displaying the correct frequency, I
assume you have not set a custom address in the IC-706mkII.
If you look at the "INI File Options" section of the Writelog
help file the [RIGS] section says:
> The following entries override WriteLog's default setting for the
> Icom rig address for the various Icom rigs. All rigs that have Icom
> rig addresses have corresponding entries in WriteLog.ini here under
> the name that matches the name in the Setup Ports dialog including
> space characters!
>
> Icom IC-781=0x33
> Icom IC-756PRO=0x12
Thus for your IC-706mkIIg you would need to add the following line
to the [RIGS] section of your "writelog.ini" file:
Icom IC-706=0x4E
As always, check the manual/help file first.
By the way ...
> In Writelog I have
>
> Com2=commPTT
> Com4=IC706, 9600, poll marked, and PTT=no
Do not use CommPTT (software PTT) with microKEYER. Set Writelog
to use PTT on the CW port. Writelog will command the Wikey IC
to generate PTT. See:
http://www.microham.com/Downloads/MK_WriteLog_Setup.pdf
http://www.microham.com/Downloads/MK_WriteLog_no_WinKey_Setup.pdf
73,
... Joe, W4TV
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of KC4HW
> Sent: Saturday, April 28, 2007 7:16 PM
> To: writelog@contesting.com
> Subject: [WriteLog] Writelog, microKeyer and IC706MK2
>
>
> Have the microKeyer working fine and displaying frequency and
> mode on the port screen.
> Have setup Writelog to work with the same port, but it will
> not display frequency/mode from
> the 706.
>
> In microKeyer I have
>
> Control=com4
> Winkey=com2
>
> In Writelog I have
>
> Com2=commPTT
> Com4=IC706, 9600, poll marked, and PTT=no
>
> Anyone have any idea why this is not displaying the
> frequency/mode in the log entry window.
>
>
> Jim/KC4HW
> http://www.AlabamaContestGroup.org
> http://www.AlabamaQSOParty.org (June 2nd and 3rd, 2007)
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|