Thanks to Joe and several others, I finally got thinkg working. I
appreciate the help folks.
73,
Dave, K4TO
K0BX wrote:
> Dave to get to the control, go to the toolbar on the WL Logging window.
> Click on Radio=>Antenna to 0 azimuth to get it going. Of course you
> have to have a callsign in the call and the Beam Headings has to show
> the Direction.
>
> Some of us have 'redefined' a shortcut key to do this. Under 'Tools'
> click 'Keyboard shortcuts'.
> Click in the box that said Shortcut Keystroke. Then press "next key
> pressed' button. The next key you press will be the new shortcut. I
> and others use the 'Graves' key for the antenna rotor.
> The 'Graves' Key (I hope I spelled it correctly) is the key just to the
> left of the number '1' key on the far left on the 4th row. Press this key.
>
> Next select the shotcut from the menu below, what you are looking for
> is 'RadioAntennaToAzimuth'. Select it, and click OK.
> Now the Graves key will move the rotor. Remember to click 'Setup' from
> the toolbar and click 'Save configuration'. Else you have to do it again.
>
> Hope this helps.
>
> Joe K0BX
>
>
> Dave Sublette wrote:
>
>> Admittedly, I have not used this program much in the years that I have
>> owned it. I have spent most of the day reading the help files, etc.
>> After much looking, I cannot find where to control the antenna
>> rotator. I find where to set up the Com Port, etc, but nowhere on the
>> lofgging screen or on the tool bar, etc,,,do I see a place to actually
>> control the antenna. I am running version 10.57H.
>>
>> Help, please!
>>
>> Dave, K4TO
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>>
>>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|