Check the "PTT" box on the FSK port (COM 7) in Router (MMTTY will
operate PTT in FSK) and set PTT to COM 6 RTS WL Will operate PTT
in CW and SSB. You DVK audio will need to come from a separate
sound card since DigiKeyer does not support voice operation.
see: www.microham.com/Downloads/DK_WriteLog_Setup.pdf
Note: starting with Router 5.0.1 this configuration will also work
with RTTYRite if you check "strict bps" in Router. Do not use the
"software FSK" setting in WriteLog/RTTYrite with DigiKeyer, microKEYER,
microKEYER II or MK2R/MK2R+.
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support@microham.com
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Jon Suehiro
> Sent: Sunday, October 21, 2007 12:50 AM
> To: writelog@contesting.com
> Subject: [WriteLog] WriteLog - DIGI Keyer - IC7800
>
>
>
> This week, I replaced my long time favor FT1000D with IC7800
> in the main rig
> position.
>
> --- Same PC with XP Pro, WriteLog latest version, DIGI Keyer
> with latest
> microHAM USB Device Router 5.0.1, and less than 1 week old IC7800 ---
>
> Actually I received DB15-IC7800 cable for microHam to replace
> the original
> cable for FT1000, nothing else is changed.
>
> WriteLog PORTS are
>
> WL
> DIGI Keyer (CAT level jumpers set to RS-232)
>
> CommSlot1=4 No Rig PTT: RTS
> CommSlot2=5 Icom IC-7800 9600 Poll x Comm PTT YES Radio 9600 8N2
> CommSlot3=6 CW (No Rig) CW: DTR
> CommSlot4=7 No Rig FSK: x PTT
> x All mode PTT on CW port RTS
>
> IC7800 CI-V Baud Rate Auto
> CI-V Address 6Ah
> CI-V Transceive ON
> RS-232C Function CI-V
> Decode Baud Rate 9600
>
> Frequency / Mode are talking to the radio from WriteLog.
>
> I can test DIGI Keyer PTT OK through Device Router (DIGI
> Keyer panel LED PTT
> ON and IC7800 on TX).
>
> ISSUE is --- On FSK, the radio PTT is actually keyed from
> WriteLog with
> MMTTY but WriteLog DVK (sound board) does not key the IC7800
> PTT on SSB
> (DIGI Keyer panel LED PTT stays OFF).
>
> At the same condition, FT1000D is keyed when DVK is activated
> through the
> function keys. I used old COM port setup with FT847 on
> COM1, PTT is keyed
> OK.
>
> ----------
>
> Smells like some how the issue is within WL but I was unable
> to find any
> hint in regard to PTT matter on SSB. Of course the wave
> file audio output
> will be transmitted if I keyed the PTT manually from either
> front panel
> TRANSMIT or external PTT through ACC jack (or turn on VOX).
>
> Any advise why remote PTT is not working ?
>
> Thanks de NN5T Jon Suehiro
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|