WriteLog
[Top] [All Lists]

[WriteLog] microHAM Router 5.1.1 Available

To: <writelog@contesting.com>
Subject: [WriteLog] microHAM Router 5.1.1 Available
From: "Joe Subich, W4TV" <w4tv@subich.com>
Reply-to: microHAM@yahoogroups.com
Date: Wed, 28 Nov 2007 16:06:13 -0500
List-post: <mailto:writelog@contesting.com>
Router 5.1.1 has been released.  This version contains several fixes 
and one significant operational improvement.  Those still running a 
version of Router prior to 5.0.0 should follow the upgrade instructions 
at: www.microham.com/Downloads/Upgrade.pdf.  Those using Router 5.0.0 
or later can upgrade simply by clicking Help | Update Router from 
within Router. 

After updating Router, upload the included firmware update to your 
interface then update and store your "power up" defaults to properly 
initialize the interface.  

Router 5.1.1 supports Windows 2000, Windows XP and Windows Vista 
(32 bit only).  Discontinued operating systems (Windows 95 and all 
versions of Windows 98) are not supported. 

The major change that will effect Kenwood and TenTec users - the 
"Digital Bandmap" Voice/Digital switching is now controlled by the 
transmit frequency instead of the "Operating" (or current) frequency. 

Of particular interest to WriteLog users, baud rate emulation on 
the FSK ports has been fixed.  This should allow RTTYrite to work 
properly with Soundboard FSK and Stereo soundboard FSK choices.  

The change log is: www.microham.com/Downloads/urouter_change_log.txt

73, 

   ... Joe Subich, W4TV 
       microHAM America 
       http://www.microHAM-USA.com 
       http://groups.yahoo.com/group/microHAM 
       support@microham.com 
 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>
  • [WriteLog] microHAM Router 5.1.1 Available, Joe Subich, W4TV <=