Hello!
I recently had a hard disk crach which resulted in me getting a new
computer.
Intalled my writelog version which is 10.44b and had most things running.
With newer computers today one gets none or only 1 com port so I installed a
extra card with 2 com ports.
My com ports are for some reason #1, #3 & #4.
Now, I plugged my rig control cabel to #1 (main board com port) and had rig
control work FB.
I plugged my CW transmit interface that I used for years with this version
of WL without problems to port#3 and rig would hang in transmit when in CW
mode.
I tried to connect it to #4 and still had the same problem.
Thinking this had to do with my serial port card I plugged rig control to
port#3 and my CW keying interface to port#1.
Guess what - radio control works, but CW keying still hangs.
This tells me there is probably nothing wrong with the ports but instead the
setup.
This is how I have the Setup/ports:
CW on COM1
Rig on COM3
DVK Type is Windows Sound Board
CW Keyer Type is PC Generates
CW PTT... is None (e.a. QSK)
What did I miss?
73 de Magnus SM6WET
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|