Magnus,
On CW PTT... try changing the 'None' button to 'On LPT pin/COMM RTS'. I
think that may do it.
73,
Gary AL9A
----- Original Message -----
From: "Magnus Aronsson" <sm6wet@telia.com>
To: "WriteLog Reflector" <writelog@contesting.com>
Sent: June 08, 2008 8:39 PM
Subject: [WriteLog] CW Keying problems
> Hello!
>
>
> I recently had a hard disk crach which resulted in me getting a new
> computer.
>
> Intalled my writelog version which is 10.44b and had most things running.
>
> With newer computers today one gets none or only 1 com port so I installed
> a
> extra card with 2 com ports.
>
> My com ports are for some reason #1, #3 & #4.
>
> Now, I plugged my rig control cabel to #1 (main board com port) and had
> rig
> control work FB.
> I plugged my CW transmit interface that I used for years with this version
> of WL without problems to port#3 and rig would hang in transmit when in CW
> mode.
> I tried to connect it to #4 and still had the same problem.
>
> Thinking this had to do with my serial port card I plugged rig control to
> port#3 and my CW keying interface to port#1.
> Guess what - radio control works, but CW keying still hangs.
> This tells me there is probably nothing wrong with the ports but instead
> the
> setup.
>
> This is how I have the Setup/ports:
> CW on COM1
> Rig on COM3
> DVK Type is Windows Sound Board
> CW Keyer Type is PC Generates
> CW PTT... is None (e.a. QSK)
>
> What did I miss?
>
> 73 de Magnus SM6WET
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
73,
Gary AL9A
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|