> There should have been a mention in the WL revision history of the
> support of the WKUSB.
WinKeyer2 is WKUSB and the new serial WinKeyer 2.
WinKeyer 2 is the new 16 pin Winkey IC that K1EL uses in his
retail keyers and kits instead of the original 8 pin Winkey IC.
The original WinKey IC is still available for those who wish
to build their own keyer, for those who need to repair an
older product and other equipment manufacturers with designs
based on the original 8 pin chip.
73,
... Joe, W4TV
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Jerry Flanders
> Sent: Wednesday, September 10, 2008 7:26 PM
> To: hank k8dd; writelog@contesting.com
> Subject: Re: [WriteLog] Winkey USB CW keyer and WL?
>
>
> Thanks, Hank.
>
> My keyer is the newest version of the USB version - only two
> weeks old.
>
> I will email Wayne to verify that the newer versions work with the
> new WKUSB. If so, I will just upgrade my WL.
>
> There should have been a mention in the WL revision history of the
> support of the WKUSB.
>
> Jerry W4UK
>
>
> At 06:51 PM 9/10/2008, hank k8dd wrote:
> >----- Original Message -----
> >From: "Jerry Flanders" <jeflanders@comcast.net>
> >To: "Alan Maenchen" <ad6e@arrl.net>; <writelog@contesting.com>
> >Sent: Wednesday, September 10, 2008 1:46 PM
> >Subject: Re: [WriteLog] Winkey USB CW keyer and WL?
> >
> >
> > > Thanks to all who helped, both privately and here.
> > >
> > > My Commslot commands work OK. Someone mentioned using a
> "winkey 2"
> > > selection in setup - I only have a winkey type available.
> You guys
> > > that have it working - is it Winkey, or Winkey 2?
> >
> >There are two versions Winkeyers.
> >
> >The older one, with the speed control on the top of the box is, in
> >Writelog, called "K1EL Winkey" and it has a serial interface.
> >
> >The newer one, with the speed control on the front and four memory
> >buttons (1 red and 3 black) is, in Writelog, called "K1ELWinkey 2".
> >The box says 'WinKeyer USB'
> >and it has a USB interface.
> >
> >If I remember correctly, the option for "K1EL Winkey 2" started to
> >appear in version 10.68F. Before 10.68F there was only
> "K1EL Winkey"
> >-- and that worked with both versions of the WinKeyer, but did not
> >support all the functions of the
> >WinKeyer USB (most notably port switching for SO2R).
> >
> >73 Hank K8DD
> >
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
> >WriteLog on the web: http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|