Well I upgraded to Writelog 10.70 and now the plugin installation program runs
and says the MMTTY plugin has been installed correctly. However, when I run
Writelog, MMTTY is still not showing up as a TNC selection. I dont know if
these files are new, but two files named MmTtyTnc.dll and mmtty.ocx are in my
Writelog directory. Any more ideas?
Bob (KI6DY)
--- On Sat, 1/24/09, Joe Subich, W4TV <lists@subich.com> wrote:
From: Joe Subich, W4TV <lists@subich.com>
Subject: Re: [WriteLog] MMMTY PlugIn Error Message
To: ki6dy@sbcglobal.net, "'Writelog Reflector'" <writelog@contesting.com>
Date: Saturday, January 24, 2009, 6:32 PM
> BTW my OS in Vista.
This is your problem. In Vista, writelog.ini is not in the
system directory when the plug-in installer expects it. I'm
sure there are ways around the problem but the only way I
know is to disable most of the Vista security crap - turn off
User Account Control and use the system level administrator
account (not a normal user account with "administrator
privileges."
Someone else may have the real work-around but since the plug
in was not written for Vista (is not Vista aware), it can be
a real issue.
73,
... Joe, W4TV
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of
> ki6dy@sbcglobal.net
> Sent: Saturday, January 24, 2009 7:05 PM
> To: Dick-w0raa; Writelog Reflector
> Subject: Re: [WriteLog] MMMTY PlugIn Error Message
>
>
> My version of Writelog is 10.66C. Could this be the problem?
> Do I need to upgrade?
>
> Writelog is installed at C:\Program Files\Writelog..
>
> Not sure if it matters but MMTTY is installed at C:\Program
> Files\MMTTY
>
> I downloaded the file MMTTYPluginforWritelog_V13.exe to my
> desktop and am trying to launch it from there where shortly
> thereafter I get the aforementioned error message. The plugin
> installation never gets to a point where it asks me where to
> install the plugin.
>
> BTW my OS in Vista.
>
> Bob (KI6DY)
>
> --- On Sat, 1/24/09, Dick-w0raa <w0raa@comcast.net> wrote:
> From: Dick-w0raa <w0raa@comcast.net>
> Subject: Re: [WriteLog] MMMTY PlugIn Error Message
> To: ki6dy@sbcglobal.net
> Date: Saturday, January 24, 2009, 5:54 PM
>
> What version of Writelog are you running, Bob? The latest version is
> 10.70C. Did you allow the MMTTY Plug-in to install in the
> default location?
> Not sure that's right, but it's someplace to look.
>
> Dick
> W0RAA
>
>
> ----- Original Message -----
> From: <ki6dy@sbcglobal.net>
> To: "Writelog Reflector" <writelog@contesting.com>
> Sent: Saturday, January 24, 2009 3:52 PM
> Subject: [WriteLog] MMMTY PlugIn Error Message
>
>
> >I am getting the following error message when attempting to
> install the
> >MMTTY plugin for Writelog.
> >
> > "Writelog must be installed"
> >
> > Problem is Writelog is installed and has been for quite some time.
> >
> > I have MMTTY up and running standalone.
> >
> > I also know that the plugin installation has failed because
> MMTTY is
> > not a
>
> > TNC option in the RTTYrite TU Type pulldown menu.
> >
> > Any help would be greatly appreciated.
> >
> > Thanks,
> >
> > Bob (KI6DY)
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|