Bob:
I thought I would give you an update. After spending about 20 hours on my
problem, I am no closer to the solution than when I started. Well, that
is not quite true.
I have MMTTY working, marginally.
All wiring is correct per all who helped out. MMTTY does key the rigs.
The sound cards are working indicated by the display I see.
Problem is the transmitted message is not working consistently. I have
Byterunner 4 comm port card installed. What is interesting is when I connect
a rig Byterunner card, the transmitted message is messed up. When I
connect to a computer comm port all is well.
I have two Byterunner cards as well as another computer running same
operation system (W98SE). I observed same on both boxes.
Keep in mind things used to work just fine before. I think I might have
an issue with the Byterunner card drivers. Understand that the card is used
both on WL and TR, which requires DOS.
I have and will research again the net for drivers.
I will also send a note to WL and MMTTY reflector to see if I can get any
help there as well
Mike WG0M
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|