Don said:
This interface does not have FSK keying so I think you will have to use LSB for
RTTY - I don't think AFSK works with the 765 in RTTY mode - but I may be wrong.
He is not wrong. Icoms must use FSK to use the RTTY mode. With an Icom this is
a big deal because in LSB (or USB) you can not select your narrow filters. I
had a great little interface (don't remember the brand) but it did not do FSK
so I had to get one that did (Rascal) so I could invoke my 500 Hz filter.
As far as rig control, he is also correct on that one. The CI-V interface is
the same for all Icoms as far as I know. The only thing that changes is the
address. This lets you run multiple Icoms on the same control buss by just
addressing the radio you want to control.
Clint - W5CPT - Icom IC-756 - Rascal and a generic CI-V level convertor.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|