The red "B" indicates that the QSO is "out of band." This would happen,
say, if you had the mode set to phone and the frequency at 1.805. You need
to make sure that the mode and frequency are consistent - e.g. CW and
frequencies betweent 1.800 and 1.850 or whatever.
Rob K6RB
>
>
> --- On Mon, 11/30/09, Joe Young <w6rll@yahoo.com> wrote:
>
>
> From: Joe Young <w6rll@yahoo.com>
> Subject: ARRL 160 Contest
> To: writelog-request@contesting.com
> Date: Monday, November 30, 2009, 11:02 AM
>
>
>
>
>
>
>
> I usually never have a problem setting up WriteLog for a contest, but
> this time I seem to be doing something wrong. When I enter a QSO into the
> log it is accepted but no value is declared for points or multi. The QSO
> number has a red B just to the right of it. I have selected "Contest" then
> "Parameter Setup" and entered AZ in the section box. Something is still
> missing. Thanks and 73.
> Joe W6RLL.
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|