In a message dated 12/13/2009 11:24:40 PM Central Standard Time,
lists@subich.com writes:
By default, the FT-2000 requires RTS/CTS handshake. You will
need a cable with 2,3,5,7 & 8 or you will need to disable
handshake in the FT-2000 menu (check your manual) and disable
RTS support in Writelog.
73,
... Joe, W4TV
Joe;
OK. I'll try the 5 wire cable. But I thought that turning Menu Setting 30
to "off" DID disable RTS support.
I tried that (with the 3 wire cable) and had no luck.
I also tried it with a 9 wire point to point cable with RTS "On" and still
no luck.
73,
Al, K0AD
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|