> I also tried it with a 9 wire point to point cable with RTS
> "On" and still no luck.
9 wire cable should work correctly ... I used one for my "real"
serial port when I had the FT-2000 on-line.
> But I thought that turning Menu Setting 30 to "off" DID disable
> RTS support. I tried that (with the 3 wire cable) and had no luck.
It does but you also need to disable RTS/CTS handshake in WriteLog
FT-2000 driver. See the information for COMn_RTS_INIT in the [RIGS]
section of the WriteLog Help file.
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support@microham.com
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of aldewey@aol.com
> Sent: Monday, December 14, 2009 7:34 AM
> To: lists@subich.com; writelog@contesting.com
> Subject: Re: [WriteLog] CAT Problems with FT2000D
>
>
>
> In a message dated 12/13/2009 11:24:40 PM Central Standard Time,
> lists@subich.com writes:
>
> By default, the FT-2000 requires RTS/CTS handshake. You will
> need a cable with 2,3,5,7 & 8 or you will need to disable
> handshake in the FT-2000 menu (check your manual) and disable
> RTS support in Writelog.
>
> 73,
>
> ... Joe, W4TV
>
> Joe;
>
> OK. I'll try the 5 wire cable. But I thought that turning
> Menu Setting 30
> to "off" DID disable RTS support.
> I tried that (with the 3 wire cable) and had no luck.
>
> I also tried it with a 9 wire point to point cable with RTS
> "On" and still
> no luck.
>
> 73,
>
> Al, K0AD
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|