I occasionally use the S/P memories and when I work any of the stations in
the window, I simple store a blank call Input window. Yes, I get a
frequency, but that is all. So, VERY easy to tell what has been worked and
not worked by the presence of a call or not.
73,
Bruce - N1LN
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Gary AL9A
Sent: Wednesday, February 17, 2010 0:26
To: writelog@contesting.com
Subject: Re: [WriteLog] Setting number of Search and Pounce memories
I believe the topic has strayed slightly off course from Ray's original
query. He wasn't asking about storing more macro sequences. What he wants
is more S&P memory locations to store a stations Call and exchange info for
recall later if he can't break the pile up. With low power he apparently
desires to store many more than the 4 positions now available so he can try
the pile ups again later. I'm not sure how useful having more S&P memory
locations would work in practice, as for me it would soon be difficult
managing which of the stored memories I have already worked and which I
still need to try again. WL provides no means of "clearing out" the memory
storage once you do work the desired station. The only option is to over
right the old info with a new station.
Ray, I should have mentioned another possibility for you. If you run in the
Assisted category and get packet spots downloaded into WL you can see new
stations, and new mults, in both the Band Map and the Packet Spots window.
Those in the Band Map will eventually time out and disappear after your
display time expires, but those in the Packet Spots window will linger until
you work them. The only info though is the Call and frequency - no exchange
info. Of course running Assisted puts you in the High Power category with a
low power station, but that's the trade off.
73,
Gary AL9A
----- Original Message -----
From: "Don Cassel VE3XD" <ve3xd@rogers.com>
To: "'Ray Day'" <rayday@cox.net>; <writelog@contesting.com>
Sent: February 16, 2010 4:30 PM
Subject: Re: [WriteLog] Setting number of Search and Pounce memories
>I use up to 20 different messages some for running and the rest for S&P.
>You just code them into the
> function keys from the Set Up menu, CW, Rtty, SSB Memory Setup... Function
> and Shift-function can be
> used. I didn't know however that Writelog had specific S&P memories.
>
> 73,
> Don VE3XD
>
>> -----Original Message-----
>> From: writelog-bounces@contesting.com
>> [mailto:writelog-bounces@contesting.com] On Behalf Of Ray Day
>> Sent: February-15-10 8:34 PM
>> To: writelog@contesting.com
>> Subject: [WriteLog] Setting number of Search and Pounce memories
>>
>>
>>
>> Hi all,
>>
>> WriteLog sure made RTTY WPX fun! Hope everybody had a good time....
>>
>> I looked in the Help file and the .ini file but can't find
>> out how to increase the number of P&P memories to a number
>> greater than 4. Is this possible? How?
>>
>> This is important to a peanut whistle station like mine - I
>> could use about 10-12! I need the bands to change in my favor
>> or the pileups to recede, and coming back a bit later really helps!
>>
>> Thanks,
>> Ray N6HE
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|