The information is in the example configuration for USB Interface III
and Writelog available via the "Help | Download Documents" link in
Router, from the Support link at www.microHAM-USA.com or from the
files area of the microHAM group on Yahoo.
If you have the MMTTY plug-installed, it should operate AFSK
exactly the same way as MMTTY alone. Select no FSK port in
RTTYrite, enable all mode PTT on the CW port and select "sound"
in MMTTY.
There are example configurations for Writelog and every one of
the microHAM interfaces. The configurations have been tested
for proper operation.
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of W0SD Ed Gray
> Sent: Sunday, April 18, 2010 9:18 PM
> To: WriteLog@contesting.com
> Subject: [WriteLog] WriteLog Microham USB Interface III and AFSK
>
>
> I am helping a couple of fellow hams and one of them has a
> FT-857 and a
> USB only Laptop and he wants to use WriteLog with that setup. The
> problem we run into is that the FT-857 does not do FSK so we
> have to do
> AFSK. We of course receive OK but we need to transmit with AFSK.
>
> I can not figure out from the documentation how to set up the
> Microham
> unit to interface the USB port to WriteLog and ASFK. Has anyone done
> this and can tell us how? We have this working with MMTTY
> and ASFK but
> we can't figure out how to do it with WriteLog?
>
> Ed W0SD
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|