Now that the subject came up let me also ask for a heads up.
My IC-746 non pro rig connection constantly drops during the contest.
First I used an interface I built myself now I picked up a usb version off
ebay, same result.
I just bought a "real" CT-17 at our hamfset and am waiting for a serial cable
to come in the mail from ebay.
Question is, how should the writelog setup be tweaked for this rig in the ini
file etc?
Port settings, address, etc...
Neither of my ft-920 rigs have ever had an issue, icom interfacing definately
not a no brainer.
Thanks in advance.......
Clay Melhorn N9IO Bonfield, IL
Webmaster: KARS - Kankakee Area Radio Society - W9AZ http://www.w9az.com/
> Date: Thu, 22 Jul 2010 17:18:39 -0400
> From: lists@subich.com
> To: writelog@contesting.com
> Subject: Re: [WriteLog] CAT Problem
>
>
> Zrinko,
>
> Writelog locks the software interface for the IC-736 to CI-V address
> 40h. You will either need to change the address in your IC-738 from
> 44h to 40h (see page 35 of the IC-736/738 manual) or establish an
> override in the [RIGS] section of the Writelog.ini file (see the
> [RIGS] information in the WriteLog help file).
>
> Add the following to the [RIGS] section of Writelog.ini
>
> Icom IC-736=0x44
>
> and select IC-736 as the rig in WriteLog "Setup | Ports ..."
>
> You can (and should) to a fixed rate in "Setup | Ports ... " as
> well as in the rigs (do not select auto in either WriteLog or
> the rig menus).
>
> 73,
>
> ... Joe, W4TV
>
> >
> > From: Zrinko Zibert<ve3zik@googlemail.com>
> > Subject: [WriteLog] CAT Problem
> > To: writelog@contesting.com
> > Date: Thursday, July 22, 2010, 1:19 PM
> >
> > Hi all,
> >
> > I am just a new one with Writelog, already used N1MM :)
> >
> > Actually, we are preparing for IOTA Contest this weekend and will be
> > active with 9A1CKL from Zirje island EU-170.
> > So, CW Keyer works perfect, but we have a problem with CAT. We have 2
> > Radios, TS2000 and Icom (same as 736 without 6m).
> > Question: what should we do make CAT to be active? I tried everything
> > are PORTS OK etc etc... The same CAT cable works perfect with my Icom
> > 738 on Logger32 and N1MM...
> > N1MM has an possibility to change BaudRate, HEX Address etc etc... we
> > are really nowhere now, loosed today over an hour to check
> > everything...
> > We'll planning to go tomorrow morning with a boat, so any quick help
> > will be very very useful :)
> >
> >
> > Thanks a lot!
> >
> > Zik VE3ZIK, DO7ZZ, YT3ZZ
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
> >
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|