Hello
I have running WL + MMTTY as FSK with no problems.
my setup:
Icom IC756 Pro III
Rigblaster Plug and Play (or Plug and Pray hi hi), only for CAT and CW. The
AFSK side is disconnected.
WL 10.74J
MMTTY
External homemade interface only to key FSK using serial port COM 1, not USB
(maybe here is the problem with your setup)
In the WL Ports Setup i have only defined the port where Rigblaster is
connected.
MMTTY has not port defined for PTT or whatever
RTTYrite, has defined COM 1 as Port and TU Type as MMTTY.
With this, I have working WL as FSK 100%
If anything else I can do for you, please let me know. I can call you home also
to check all the setup ok?. Pse send me private message with your phone if you
want.
73 de XE1EE
Alex
*********************
XE1EE
Alejandro Valdez O.
www.dxxe.org
DXCC RTTY, CW & SSB
WAS
WAC
***********************
De: writelog-bounces@contesting.com
Para: "Gary AL9A" al9a@mtaonline.net
Cc: writelog@contesting.com
Fecha: Sun, 19 Sep 2010 22:44:59 -0700
Asunto: Re: [WriteLog] FSK via WL/MMTTY
> Thanks, Gary. I have combed through the archives and now know more
> than I ever wanted about the UserPara.ini problem. :)
>
> I have all the appropriate ports pointing to the correct FSK port and
> the sound card settings are good, too.
>
> Joe's comment that I can't use an MMTTY EXTFSK module sounds like the
> ultimate source of the problem.
>
> I appreciate everyone's help.
>
> Dick
>
>
> At 10:01 PM 9/19/2010, Gary AL9A wrote:
> >Hi Dick,
> >
> >Don't worry about the UserPara error message. That has been talked to death
> >on the reflector, but with no solution yet. See the archives if you want to
> >follow the whole string. That is not the cause of your inability to
> >generate FSK with WL/MMTTY.
> >
> >I have a microHAM microKEYER II as my interface device so am unfamiliar with
> >the RigExpert Plus product. The microHAM products use a software package
> >called the Router that sets up all the interface parameters between the
> >computer, the radio and the MK II. One thing that has to be set for FSK to
> >work is that the FSK port must be the same in both Rittyrite and the
> >microHAM Router. I am also using COM6 as my FSK port and do not use the
> >Software Generated FSK via TxD setting. Check the RigExpert Plus manual
> >about port assignment for FSK. If you have a different port assigned in the
> >RigExpert, try making it the same as your Rittyrite port.
> >
> >One other thing to check is in the MMTTY plug-in settings. On the MMTTY
> >Control Panel click on Option(O)/Setup(O)... On the Misc tab there is an
> >area on the left side called "Device Identifiers" and a box for RX and
> >another for TX. These are for assigning your soundcard device numbers.
> >They must be correct. Click on the SoundCard tab to see a list of your
> >soundcard devices. One side is for Reception, the other for Transmission.
> >The lists are not numbered, but the order is 0,1,2,3, etc. So the first
> >item in the list is device 0, the second item is device 1, etc. Make sure
> >the Misc tab has the correct device identifier numbers.
> >
> >73,
> >Gary AL9A
> >
> >
> >----- Original Message -----
> >From: "Dick Flanagan"
> >To:
> >Sent: September 19, 2010 5:46 PM
> >Subject: Re: [WriteLog] FSK via WL/MMTTY
> >
> >
> >> Thanks, Wayne, and to others who responded privately. I am still
> >> unable to generate FSK via WL/MTTY from my USB-connected RigExpert Plus.
> >>
> >> I re-sequenced all COM ports so they were addressed COM8 or below,
> >> but I am still unable to generate FSK. (Again, MMTTY works fine
> >> standalone.)
> >>
> >> I have my FSK port (COM6) selected in the Rttyrite Ports menu and I
> >> tried it both with and without selecting Software Generated FSK via TxD.
> >>
> >> The instructions for installing the WL/MMTTY plug-in said to ignore
> >> error messages, but I think one may be relevant (DUH!). When I fire
> >> up the WL RTTY window, there is a small windows in the top left of
> >> the window that says: "Initializing MMTTY. Please wait." Then a
> >> small error window crops up that says
> >> "ERROR: UserPara.INI*%&^@#$%&^*(" The garbage is real. It looks
> >> like an un-terminated message string. I respond "OK" to that window
> >> and MMTTY seems to initialize fine.
> >>
> >> I really hate feeling stupid like this, especially if this is a known
> >> limitation of WL. There is noting like spending over $300 for an
> >> interface that doesn't work with my favorite contest logger! :(
> >>
> >> Is there any other information I can provide to help someone bail me
> >> out? I'm running Windows XP.
> >>
> >> Dick
> >>
> >> At 07:41 AM 9/19/2010, Wayne wrote:
> >> > This does work. You need to use a com port below com8 even though both
> >> >Writelog and MMTTY can use ports higher than Com8. Seems the plugin can
> >> >not handle ports above Com8.
> >> >
> >> >73
> >> >
> >> >Wayne WA1PMA
> >> >
> >> >On 9/18/2010 11:46 PM, Dick Flanagan wrote:
> >> >> I am trying to enable FSK via the latest WL (V10.79) and MMTTY
> >> >> plug-in (V13). I am using a RigExpert Plus connected to computer via
> >> >> USB port. Standalone MMTTY (V1.66G) works fine.
> >> >>
> >> >> I have configured Rttyrite to use the correct USB/FSK port and
> >> >> selected Software Generated FSK via TxD.
> >> >>
> >> >> The WL/MMTTY settings TX window shows Sound only, with both FSK
> >> >> options grayed out. Transmitting gives me tone only, no
> >> >> diddle. Again, standalone MMTTY works fine.
> >> >>
> >> >> Shouldn't the latest WL be able to handle this?
> >> >>
> >> >> Dick
> >> >> --
> >> >> Dick Flanagan K7VC
> >> >> dick@k7vc.com
> >>
> >> --
> >> Dick Flanagan K7VC
> >> dick@k7vc.com
> >> _______________________________________________
> >> WriteLog mailing list
> >> WriteLog@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/writelog
> >> WriteLog on the web: http://www.writelog.com/
> >
> >
> >
> >
> >
> >
> --
> Dick Flanagan K7VC
> dick@k7vc.com
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|