WriteLog
[Top] [All Lists]

Re: [WriteLog] Displaying Packet Spots SOLVED

To: writelog@contesting.com
Subject: Re: [WriteLog] Displaying Packet Spots SOLVED
From: Dick Flanagan <dick@k7vc.com>
Date: Tue, 28 Sep 2010 18:50:06 -0700
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
OK, Boys and Girls, I have good news and frustrating news....

The good news is that by re-installing WL my problems are gone and 
all packet-related operations work normally.

The frustrating news is I read the posts about checking the Single 
Operator option under the Packet Terminal Edit menu after I effected 
the re-install.  Checking that option under my newly re-installed WL 
I see that it is turned off.  When I turn it ON it acts just like my 
errant system did before the re-install.

I can only assume that I had inadvertently turned on the Single 
Operator option and that was the source of my missing packet 
spots.  I only wish I had tried that before I re-installed just to be 
100% sure that was the culprit.  In any case, all the King's horses, 
all the King's men and all the great people on this reflector WERE 
able to solve the problem.  THANK YOU all for your time and effort. 
Thank you for letting me be a part of this group!

Dick

At 03:26 PM 9/28/2010, Gary AL9A wrote:
 >But WL doesn't know what your category is during the contest!  There is no
 >way for it to know if you are running as a true single op or as single op
 >assisted, which puts you in the multi-op category, or as a true multi-op
 >single radio.  The category designation isn't determined until you create
 >your Cabrillo log and submit it to contest organizers.  From Dick's reply it
 >sounds as if he may have a corrupted install and a reinstall may be the fix/
 >
 >73,
 >Gary AL9A
 >
 >----- Original Message -----
 >From: "Jim Reisert AD1C" <jjreisert@alum.mit.edu>
 >To: <dick@k7vc.com>
 >Cc: <writelog@contesting.com>
 >Sent: September 28, 2010 11:25 AM
 >Subject: Re: [WriteLog] Displaying Packet Spots
 >
 >
 >> I am able to log onto my cluster in the Packet Window and I see all
 >> the spots scrolling past. However, nothing shows up in the Packet
 >> Spots Window or on the Band Map.
 >
 >Single-op can't aren't allowed to see packet spots.  Single-op
 >assisted/unlimited or multi-op *can* see spots.  Could that be your
 >problem (wrong category)?
 >
 >73- Jim AD1C
 >
 >--
 >Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us


--
Dick Flanagan K7VC
dick@k7vc.com
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>