I just followed Don's and Phil's instructions re the SM6SRW contest modules.
Uninstalled the earlier SM6SRW modules with the Windows uninstaller in
Vista, then reinstalled all the modules with the WriteLog Legacy Helper.
All went smoothly, but upon starting a new contest log I cannot find a
module called SP RVG RTTY in the list of installed modules. I still have
the SPDX RTTY Contest and SPDX Contest (CW and SSB) modules. I selected
the SPDX RTTY module and imported my adif file last weekends contest. The
import worked correctly and everything is in the log. Unfortunately when I
go to Export the Cabrillo option is still grayed out and unusable. The only
thing I did differently was at the end when the list of what had been
installed appeared I selected Cancel instead of the red X box. I doubt this
made a difference,but I'm guessing here. Anyone else care to chime in with
and opinion.
73,
Gary AL9A
----- Original Message -----
From: " pcooper" <pcooper@guernsey.net>
To: <writelog@contesting.com>
Sent: April 25, 2011 1:17 AM
Subject: Re: [WriteLog] SP RTTY and Cabrillo
> Hi all,
>
> OK, all is now OK. I have followed the instructions on Don's website about
> the legacy installer, and it would appear that when I set up this new PC
> with WL, I did not properly install the SM6SRW module.
> I cannot remember what i did, but I do not remember using the Legacy
> Helper installer!
>
> What is odd is that I do seem to have some of the contests only found in
> the SM6SRW module, and have used them, so I don't know how they got there.
>
> Anyway, after running the Legacy Helper, I started a new log, chose the SP
> RVG RTTY contest, imported the file created when I ran the SPDX contest
> module, and was then able to export a good Cabrillo file.
>
> Now, for those of you in a similar situation, you need to check out the
> web page provided by Don on how to install the SM6SRW module here:
> www.rttycontesting.com/tutorials/legacyinstaller.html
>
> Also, if any of you have used the adif2cabr program by Marek SP7DQR,
> please CHECK the resdulting Cabrillo file!
> I used this first time round, and found that it did NOT export any
> received serial numbers or Provinces.
> You will need to export the "ASCII with no formatting by time" option, and
> then use Marek's WL2CABR program to convert the resulting text file. That
> DOES work.
>
> Don (AA5AU), I did notice one small difference when following your page
> about using the legacy helper!
> At the end, a small window opens up giving a list of changes/movements of
> modules.
> There is only one option button available, which is CANCEL.
> I did wait for some time, just to see if another button popped up, but it
> did not. I guess this window is just a summary window for information, but
> I closed it using the red cross at the top right.
>
> 73 all
>
> Phil GU0SUP
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|