I don't know of a way to have WriteLog not toggle between the two WinKeyer
outputs as you move between the two Entry windows. I would just put a RCA
Phono Y-adapter on the WinKeyer outputs. I do that all the time in
situations like this. The outputs are open-collector transistors so
effectively you are just wire-ORing them to the K3 KEY input.
73,
Ed - W0YK
-------------------------
Ed Muns
www.w0yk.com
> -----Original Message-----
> From: John Graf [mailto:wa6l@mac.com]
> Sent: Thursday, December 15, 2011 8:19 AM
> To: w0yk@msn.com
> Cc: writelog@contesting.com
> Subject: Re: [WriteLog] SO2V with K3
>
>
> Eureka -- I have found it. I figured out what the problem
> is, and can now start working on a solution.
>
> I am using the K1EL WKUSB Winkeyer II. It has two outputs,
> KEY1 and KEY2. My K3 is plugged into KEY1.
>
> When you select 2 radios in the Writelog setup, the program
> automatically switches the keyer output from KEY1 to KEY2
> when you change the focus the the 2nd radio. So that was
> what was happening to me. The keyer output got switched to
> KEY2 whenever I selected the 2nd receiver, and there is
> nothing hooked up to the KEY2 output. Writelog doesn't
> understand SO2V when it comes to the keyer output.
>
> I am sure that there is a way to fix this. I have to
> research to see if there is an .ini setting that will stop
> Writelog from switching keyer outputs. If not, then I am
> sure I can figure out a 'Y' cable with a couple of diodes to
> have both outputs key the K3.
>
> Thanks again for your help, Ed.
>
> 73,
>
> John, WA6L
>
>
>
> On Dec 12, 2011, at 12:30 PM, Ed Muns wrote:
>
> > Hi, John!
> >
> > I have been using the WriteLog SO2V feature with the K3 since it
> > appeared in the code and there have been no issues. I'm
> very pleased
> > with the way it works. For the 10-Meter Contest this
> weekend, I used
> > the WinKey built in to a microHAM u2R and WriteLog 11.01e,
> but nothing
> > to do with this changed from 10.90. In the 10-Meter RTTY
> Contest the
> > previous weekend, I used the WriteLog SO2V K3 feature with two
> > homemade FSK/PTT interfaces on separate Com ports, one for each
> > Rttyrite window for its respective VFO. The two interfaces
> connect together with a Y-adapter cable at the K3 ACC jack.
> >
> > When you're setup for SO2V in WriteLog, do you still have keying if
> > you simply put the K3 into SPLIT mode without changing
> focus in WriteLog?
> > Which exact WinKey model do you have and which keyer menu
> choice did
> > you select in WriteLog? Send me a screen capture of your WriteLog
> > Ports window ... maybe I'm overlooking something obvious in
> the setup.
> >
> >
> > 73,
> > Ed - W0YK
> > -------------------------
> > Ed Muns
> > www.w0yk.com
> >
> >
> >
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|