I've had exactly the same experience as K0BX. Only had the problem if I tried
to log while transmitting but it's very intermittent. I'm not using v11.
- Aubrey N3BM
On Feb 6, 2012, at 10:13 PM, k0bx@arrl.net wrote:
> I too have had the frequency jumping problem and logging the wrong frequency
> because of it. I found my solution.
> It only happened to me when I was logging a qso while I has transmitting. If
> I
> waited until after the macro was finished and the rig went back to receive, I
> would not have the problem.
> My solution was to add "%L" to the end of the macro that gave the report or
> the
> thank you. The %L logs the QSO before the rig has time to go into xmit.
> End of problem for me.
>
> Joe K0BX
> Stop the insanity!
> Please do not add me to any distribution lists (Joke, Stories or Junk)
> without
> my permission.
>
>
>
>
>
> ________________________________
> From: Eric Rosenberg <ericrosenberg.dc@gmail.com>
> To: Writelog Reflector <writelog@contesting.com>; support@writelog.com
> Sent: Tue, February 7, 2012 2:45:38 AM
> Subject: [WriteLog] 11.01F Oddness
>
> During the CQ 160 CW contest last weekend we (K2PS and me) ran into two
> oddities and one function that didn't work in 11.01F.
>
> We were operating assisted with a telnet feed (no skimmer... haven't
> quite figured out how to configure it).
>
> 1. Every once in a while the frequencies in the bandmap would -- on its
> own -- change to some large number (non-ham frequency in 130 MHz range)
> and then return to the actual frequency of the radio. The radio never
> changed to the odd frequency. Pete says he's seen this happen in
> previous versions. I haven't.
>
> If you were unfortunate to have entered the QSO when the bandmap showed
> you the odd frequency, WL put a red "B" next to the sequence number and
> weird out-of-band frequency in the log. At first we thought we were
> doing something wrong, but as the evening wore on, we would sit on our
> hands and watch this happen all by itself!
>
> I reiterate, we would sit on our hands and watch this happen all by
> itself!I ran WL last night and it happened all by itself as I was doing
> other stuff in the shack.
>
> 2. The top of the mult window was off the screen, so we couldn't move it
> to where we wanted to. We couldn't figure out how to move it other than
> edit the INI file. Our problem was that we couldn't figure out what the
> correct number (dimensions) was for us to be able to see enough of the
> window to move it where we wanted to.
>
> 3. The GetScores interface did not work.
>
> Any thoughts/help in getting these things fixed is greatly appreciated!
>
> 73,
> Eric W3DQ
> Washington, DC
>
> Station:
> TT Orion 565
> MicroHam MicroKeyer II
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|