I think you could do it with DDUtil.
GL de W1EL
On 3/22/2012 3:10 PM, Andre VanWyk wrote:
> Understood, but in the Writelog port setup, you cannot duplicate a port. So,
> lets say you have radio one in the 1st window set to COM port 1, (where the
> CT-17 is connected to) and radio two in the 2nd window, you cannot name it
> COM port 1 again. Writelog will not allow it.
>
> So, how do you route the CIV from the other radios connected to the CT-17 on
> COM1 to the other radios?
>
> Andre
> NJ0F
>
> --------------------------------------------------
> From: "Len Morris"<lmorris@lenmar.net>
> Sent: Thursday, March 22, 2012 2:04 PM
> To: "Andre VanWyk"<kr5dx@yahoo.com>
> Cc:<writelog@contesting.com>
> Subject: Re: [WriteLog] Icom CT-17 with Writelog
>
>> Each Icom radio has its own Hex address, and the CT-17 connects to one
>> com port.
>> Len
>>
>> On 2012-03-22, at 2:53 PM, Andre VanWyk wrote:
>>
>>> Does anyone out there know of a way to use an Icom CT-17 CIV unit (with
>>> multiple radios connected to it) with Writelog.
>>> Since there is no way to be able to assign the same com port number to
>>> both radios, I would guess this is impossible, but there might be some
>>> virtual comport / bridging software out there?
>>> Any help would be appreciated.
>>>
>>> 73
>>> Andre NJ0F
>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web: http://www.writelog.com/
>> Len Morris VA3LM/VE3FJB
>> lenmorris@lenmar.net
>>
>>
>>
>>
>>
>>
>>
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
--
Eric Lowell
48 Loon Road
Wesley, ME 04686
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|