WriteLog
[Top] [All Lists]

Re: [WriteLog] Writelog RTTY Error Message

To: "writelog@contesting.com" <writelog@contesting.com>
Subject: Re: [WriteLog] Writelog RTTY Error Message
From: Don AA5AU <aa5au@bellsouth.net>
Reply-to: Don AA5AU <aa5au@bellsouth.net>
Date: Thu, 12 Apr 2012 09:09:11 -0700 (PDT)
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
"Failed to create custom TNC handler" may mean that the MMTTY plug-in for WL is 
not properly installed.

Go to Control Panel > Add/Remove programs and see if the MMTTY plug-in for 
WriteLog is listed. If it is, uninstall it and then reinstall it using the 
WriteLog Legacy Installer. If the MMTTY plug-in is not listed, install the 
MMTTY plug-in for WriteLog by using the Legacy Installer.

If that doesn't work, perhaps the path to MMTTY is not correct in the 
writelog.ini file. Check the writelog.ini file and see if the path to MMTTY is 
correct under [Rttyrite].

If all else fails, save writelog.ini as something else, like writelog.old, 
restart WriteLog. WriteLog will create a new .ini file and you start from 
fresh. Open Rttyrite and see if MMTTY is listed in the TU Type list. If not, 
MMTTY plug-in is not installed. If it is listed, click on it and you will then 
need to navigate to the location of mmtty.exe. It's important that mmtty.exe is 
listed in a folder where the entire MMTTY program is installed and not just the 
engine mmtty.exe by itself.

73, Don AA5AU



>________________________________
> From: Ray Day <rayday@cox.net>
>To: writelog@contesting.com 
>Sent: Thursday, April 12, 2012 8:45 AM
>Subject: [WriteLog] Writelog RTTY Error Message
> 
>Hi all,
>
>
>
>Just updated Windows (XP) with a series of "Windows Updates" and now when I
>start Writelog and select an Open Recently Used (and New also) log, I get
>the RTTYrite Windows Application error message "Failed to create custom TNC
>handler." When I click on OK, the Rttyrite window comes up, but not the
>MMTTY window. Seems this error is generated in trying to open the MMTTY
>window, and when cleared (error message window closed), the opening process
>is continued (rttyrite window comes up) but without the MMTTY window. 
>
>
>
>So in troubleshooting, I started a new log and saved config without the RTTY
>windows selected in the save config choices. So now I open OK, but when I
>select "RTTY Window," the above happens. And after about 3 secs, the dreaded
>"Server busy" window appears also. Choices are "switch to" or "retry." In
>the past, I could close that error window thru Task Manager and ending
>"Profiles," but now the only choice there is to end Writelog itself.
>
>
>
>This happened with v11.04, the latest. I removed it through Windows control
>panel and reinstalled v11.03, no better. I'm suspecting it's something in
>Windows XP now, unfortunately.
>
>
>
>Any ideas as to what's up with all this? Your help would be appreciated!
>
>
>
>73
>
>Ray N6HE
>
>
>
>
>
>
>
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>