Jim,
Don't just shut WL down with all those Rttyrite windows open. Try closing
the clone window first before shutting down WL.
73,
Gary AL9A
----- Original Message -----
From: "Jim N7US" <n7us@arrl.net>
To: "Writelog Reflector" <writelog@contesting.com>
Sent: July 27, 2012 9:18 AM
Subject: [WriteLog] Can't save config with RTTY clone window
>I have WL set up for two radios (actually one K3 with the subreceiver). I
> have a Rttyrite window set up for each radio plus a cloned receive window
> for radio #1 that uses a DXP38 for a total of three decoding windows.
>
> All of that works fine, but when I restart the program the cloned DXP38
> window "thinks" it's the Rttyrite window for radio #2 instead of the clone
> for #1. I have to change the TU type to MMTTY and the COM port to the
> second TX port for radio 2 and reopen a cloned window for the DXP38 on
> radio
> #1.
>
> Incidentally, the MMTTY control panel for MMTTY on radio #2 is set to
> "always on top" but I can't see how to change that.
>
> Am I doing something wrong?
>
> Many thanks.
>
> 73, Jim N7US
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|