WriteLog
[Top] [All Lists]

Re: [WriteLog] Sound board

To: "Joe Subich, W4TV" <lists@subich.com>, <writelog@contesting.com>
Subject: Re: [WriteLog] Sound board
From: "Roger" <jrwise@hbci.com>
Date: Sat, 11 Aug 2012 10:04:19 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
On the writelog mixer sound board everything is conexant hd audio I have no 
other choices than conexant.
Rog thanks

-----Original Message----- 
From: Roger
Sent: Saturday, August 11, 2012 9:47 AM
To: Joe Subich, W4TV ; writelog@contesting.com
Subject: Re: [WriteLog] Sound board

windows 7
Rog KI0F

-----Original Message----- 
From: Joe Subich, W4TV
Sent: Saturday, August 11, 2012 8:56 AM
To: writelog@contesting.com
Subject: Re: [WriteLog] Sound board


What operating system?

> When I switch to writelog I first get a message “failed to start
> recording loop is the sound board in use?”

You should probably disable the recording loop if you are going to
use the decoder.  I don't know if it's possible to run both.  In
any case, have you configured Writelog to the correct sound card
(Sound board mixer control in the WriteLog section of Windows Start
Menu)?

> I cannot get a signal to the cw window.

Which "CW Window" RTTYrite in CW mode or the the multi-channel CW
display?  If you are using RTTYrite, have you selected the correct
(sound board/stereo sound board) option based on number of radios and
RTTY windows?  If you are using the multi-channel CW display, try
configuring it for two radios (it seems to hang when one radio is
selected).

Have you configured Writelog for your soundcard and the correct input
- Writelog Sound board mixer Control?

73,

    ... Joe, W4TV


On 8/11/2012 8:48 AM, Roger wrote:
> I am using Microham usb device router 8.14.(micro KEYER)  I use this
> with Dx4win v 8.05 and writelog v11.04a.  I must have something set
> wrong with the  sound board.  I receive psk 31 just fine in Dx4win
> psk window.  It also reads the band and mode changes just fine.  When
> I switch to writelog I first get a message “failed to start recording
> loop is the sound board in use?”  I  cannot get a signal to the cw
> window.  Writelog reads the frequency and mode ok.  I know this just
> has to be a small change but I have tried many different things.
> Last night I could get it going ok in both programs and thought it
> was just fine.  This morning same thing with writelog.  I don’t know
> what happened when both programs worked just fine and now only
> dx4win. Any help.  I will be gone for a few days but back next week.
> Rog
> _______________________________________________
> WriteLog mailing
> list WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/ 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>