I don't see the problem here, however I don't use RTTYWrite. If I click on
a spot in the spots window, or on the band map, the callsign appears
properly in the QSO entry window, with the cursor at the start on the
callsign. I thought it was always this way. Hitting spacebar moves the
cursor to "nr." Ver 11.07D here.
73
Hal
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Gary
AL9A
Sent: Thursday, November 01, 2012 11:40 PM
To: writelog@contesting.com
Subject: Re: [WriteLog] WL and the CW SS
Ray,
You may stumbled upon a bug in V10.79D at least as far as the SS CW module.
When the call is entered in the CALL field, either by typing by hand or by
clicking on call in the Rittyrite window the cursor is supposed to jump
backwards to the NR field so you are ready to copy his serial number. The
SS module under previous WL versions did this, but V10.79D doesn't!
If the call is typed in by hand and then the space bar is hit the cursor
does jump back to the NR field. However, if the call is clicked on in the
Rittyrite field the cursor jumps forward to the CK field. This is wrong!
The exchange will start with the serial number and now you must either hit
the space bar 3 times to cycle from CK to SECT, SECT to CALL and then CALL
backward to NR! Or, after clicking on the call in Rittyrite click again in
the NR field to be in the correct position to copy the serial number.
This is a serious defect in this WL module! Any chance Wayne or Steve can
find a cure by Sat.? I sure hope so.
73,
Gary AL9A
----- Original Message -----
From: "Ray Day" <rayday@cox.net>
To: <writelog@contesting.com>
Sent: November 01, 2012 5:31 PM
Subject: [WriteLog] WL and the CW SS
> Hi all,
>
>
>
> I have WL 11.07D up and running, all tuned up (Win XP, Omni VII) - except
> for one thing...
>
>
>
> I haven't worked the CW SS with WL before, so I'm not sure if what I'm
> experiencing is normal or messed up..
>
>
>
> I'm using the RTTYRITE window (CW / Sound Board AFSK / none) and decode CW
> and calls pretty good.
>
>
>
> SCP is working and some calls highlight themselves and when I click on a
> call, the call populates the CALL window. Actually anything with a number
> in
> it populates the CALL window.
>
>
>
> BUT after a call is inserted in the ENTRY window, when I click on a
> 2-digit
> number, it re-populates the CALL field, rather than going to NR (or even
> CK).
>
>
>
> I'm used to WL populating the "proper" field sequentially (almost all my
> WL
> efforts so far have been on RTTY). so what's up? On CW, is the CALL field
> the only field that gets populated by clicking? I'm a 2-finger typist, so
> I
> LOVE RTTY + WL since I don't need to type ANYTHING - it's all mouse
> clicking
> - life is good! Is CW supposed to be the same way, or am I on my own for
> typing in the NR/PR/CK/SEC fields manually?
>
>
>
> Any help would be greatly appreciated!
>
>
>
> 73,
>
> Ray N6HE
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|