I received a number or responses to my inquiry which I really appreciate.
Many gave links to instructions or copied them in the email and some doubted
that I had a 378 address on my PCI card. I have done this a number of times
with no issues, but it is always possible to forget a step. I don't believe
that missed anything setting up Direct I/O or Writelog and if I did, I think
Writelog would be been grayed out and not allowed me to select LPT1. This
PCI card has programmable DIP switches which I set for 378 and that is the
range that shows up in the device manager. I bought this because I was
unable to get a non standard PCIe card to work on this machine. I have had
success with non standard PCI cards on other computers. What I did notice
is that there is only one memory range under resources on this computer and
other computers that I have used with Writelog have a second mapping
address. WS7I suggested changing the BIOS to allow ECP+. This sounded
like an excellect suggestion. I tired to get this working before the SS
contest and unfortunately did not see a printer port setting in my BIOS so I
had to manually switch my DX Doubler all weekend. I'll try again to change
to a different printer port mode, hopefully it's possible on newer
computers.
----- Original Message -----
From: <john@kk9a.com>
To: "'WriteLog'" <writelog@contesting.com>
Sent: Saturday, November 17, 2012 01:55
Subject: Parallel Port with V11.06a and XP Pro SP3
I have a computer that is about a year old with XP Pro SP3 and I just
installed Writelog V11.06A. When I purchased the computer I installed a
SIIG PCIe card with two serial ports and one parallel. The serial ports
worked fine and I never tried the parallel until this week. I installed
Direct I/O and checked the appropriate boxes in the ports menu, however the
card just sent a solid CW tone when plugged into a keyer. Thinking
something was wrong with the card or with using a PCIe slot, I purchased a
StarTech PCI parallel port adaptor today. This one was more expensive, but
it uses standard memory mapping. I installed it and again the devices
manager says that it's working and Writelog recognizes it, but this card
does nothing. I tried reinstalling the driver and used different LPT keyers
and nothing happens. The checked the mapping of writelog,ini, direct i/o
and the LPT1 device manager and they are all 378. I have used a parallel
port with an old version of Writelog with XP Pro SP2 for years on many
different cards and computers without issue Does the newer Writelog and XP
Pro SP3 support a parallel port? I'm running out of things to try.
John KK9A aka P40A
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|