I am running XP, most current Writelog version, have selected the
port where my Radio 2 FSK interface is connected (port 14)on the
rttyrite panel, have 2 separate MMTY's selected in the ini files.
There is a limitation in the MMTTY plug-in for WriteLog ... it will
not pass FSK ports above COM8!
The MMTTY plug-in is third party software developed before MMTTY was
expanded to support ports greater than COM8. The developer of that
plug-in has not maintained it for several years and thus it has not
been updated to support COM9-COM16.
The only suggestion (other than convincing a programmer to create an
updated version) is to rearrange your ports to move any MMTTY FSK
ports below COM8.
73,
... Joe, W4TV
On 1/3/2013 12:08 PM, Stephen Colello wrote:
Thanks everyone for all the help. Got everything hooked up, but now I am
at a dead end. Radio 1 works great. Radio 2 works great, except I cant
get it to diddle in transmit.. It keys, but no diddles. The problem is
that on the Rtty control panel,set-up, Misc, the FSK options are grayed
out. I need Sound + Com TxD (FSK) for radio 2 to transmit properly.
Checked radio 2 using MMTY stand alone and works fine when I select FSK.
I am running XP, most current Writelog version, have selected the port
where my Radio 2 FSK interface is connected (port 14)on the rttyrite
panel, have 2 separate MMTY's selected in the ini files. The MMTY for
radio 2 is a brand new MMTY download that checks out with the radio 2 as
a stand alone. If I could just get the grayed out to show, I would be in
business.
Any thoughts or advice.
Steve
KA2KON
----- Original Message ----- From: "Ed Muns" <w0yk@msn.com>
To: "'Stephen Colello'" <colellos@earthlink.net>; "'Writelog'"
<writelog@contesting.com>
Sent: Wednesday, January 02, 2013 12:08 AM
Subject: Re: [WriteLog] SO2R MTTY
You only need one instance of MMTTY if you bring each radio's audio into
different channels on the stereo LINE IN connection to your soundcard.
Then
in each radio's Rttyrite window select the left or right channel
accordingly.
You can also install MMTTY twice, in different directories, and point the
Rttyrite window for each radio to a different MMTTY instance. This
method
is useful if you want to use a different soundcard for each radio's audio
stream.
Another use of both channels using the same MMTTY instance is for SO2V
where
you feed the main receiver audio into one channel and the sub-receiver
audio
into the other. With separate Rttyrite windows looking at each receiver
audio stream, you can monitor and work two frequencies on the same band,
interleaved transmissions, of course.
Ed P49X
Steve KA2KON wrote:
Does anyone know if there is a way to run SO2R with one computer and one
sound card using Writelog and MMTY. Somewhere I think I remember
something
about running 2 instances of MMTY and using right channel, left
channel on
the sound card or maybe not
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|