Hi again, Gary, and also to the others who may be following this mystery.
As for sounding like a lawyer, no problem. I added the line
Mouse_Wheel_Hz=n (made n=5) to my WRITELOG.INI file. Made no difference.
I still don't get anything to change.
I checked the Band Edges and all is OK there.
I right clicked on the bandmap and saw that "Restrict clicks to legal bands"
was
checked. I cleared that checkmark and now I can click on a station in the
bandmap
and the call is entered in the Entry Window and the FT-950 goes to the
frequency
the station is on. Not sure how that line got checked because I sure don't
recall
clicking on it. But then I have days when I can't remember what I had for
breakfast
that day. So, your suggestion to uncheck that line did the trick, Gary.
Fantastic!
So, it looks like things are working, except for the mouse wheel changing
frequency.
I use a cordless mouse, so that may be part of the problem. That particular
thing
is not as important as having the radio jump to the proper freq when a call
is clicked
on and having the call fill the entry window. I can turn the knob on the
radio.
If anybody can come up with an answer as to why the mouse wheel is not
changing
the radio freq or bandmap freq I'm open to an answer.
Thanks for the help, Gary and also thanks to some of the others who tossed
out
suggestions. Now, back to that mouse wheel....
73,
Dick
W0RAA
PS: See you in the WW this weekend.
----- Original Message -----
From: Gary AL9A
To: DickT-W0RAA
Sent: Wednesday, September 25, 2013 3:11 PM
Subject: Re: [WriteLog] Help with Bandmap
Ok Dick, this is starting to get more interesting. Sorry to sound like a
lawyer, but a few more questions.... It is normal behavior for a call that
has been added to the band map to remain there until it times out even if
the call is deleted from the Entry window. Since you are getting the call to
populate the CALL field by clicking in the Super Check Partial window there
is correct communication between WL and the radio. The mouse wheel info is
contained in the writelog.ini file in the Configuration section.
Mouse_Wheel_Hz=n sets the number of Hz to move the radio/Band Map dial with
each move of the mouse wheel. Check your ini file to see if this is still
present.
Do you have Band Edges defined in WL for your Band Map window? These are
created by using the Edit Sub Bands utility in the WriteLog program group.
If so, and you have defined a Digital Sub Band, for example mine goes from
14000 to 14150 for Digital, does the defined Digital Sub Band include the
RTTY upper limit? Is your radio within the limits of the Sub Band
definition? Right click on the Band Map and look at the window of options.
Is “Restrict clicks to legal bands” checked? If so, clear the check mark
and see if that makes any difference.
Just fishing here, but something is conflicting somewhere.
73,
Gary AL9A
From: DickT-W0RAA
Sent: September 25, 2013 11:45 AM
To: Gary AL9A
Subject: Re: [WriteLog] Help with Bandmap
Note responses in Blue, Gary...
----- Original Message -----
From: "Gary AL9A" <al9a@mtaonline.net>
To: "Dick-W0RAA" <dickt@w0raa.com>
Sent: Tuesday, September 24, 2013 4:51 PM
Subject: Re: [WriteLog] Help with Bandmap
> Dick,
>
> I would like a bit more info on your Band Map problem. You say
everything
> else related to CAT control works... So when you double click on a call
in
> the Band Map does the call auto populate the CALL field in the Entry
box?
No. Nothing happens.
> When you manually tune the VFO does the Band Map scroll with the VFO
> frequency change?
Yes. If I turn the knob on my FT-950, the bandmap follows the frequency.
If your mouse has a wheel on it, does the radio frequency
> change up or down when you roll the mouse wheel?
It dis it once (changed freq on radio), but after I clicked on the ststion
in the
bandmap it stopped working. If I enter a call in the entry window and
tell it to
add to bandmap it does it. But, if I deleete that call from the entry
window it's
still on the bandmap. If I double click on it I get no response. If I
start to enter
a call in the entrry window, a list of calls with the letters I typed
appear in the
Super Check Partial window. If I click on any call in that window, it
appears
in the data entry window.
If so, does the Band Map
> scroll in sync with the mouse wheel too? There's got to be reason
somewhere
> for your problem. We just need to find it!
>
> 73,
> Gary AL9A
>
> -----Original Message-----
> From: Dick-W0RAA
> Sent: September 24, 2013 1:24 PM
> To: Gary AL9A
> Subject: Re: [WriteLog] Help with Bandmap
>
> Thanks, Gary. I'll take a closer look at the shortcuts you mentioned.
I do
> use the numerical keypad for Fn keys in contests. Never thought about
using
> them the way you mention. I'd still like to be able to click on a band
map
> call and jump to that freq. Everything else related to CAT control
works
> fine. Hope to see you in the contest.
>
> Dick
> My memory isn't as good as it used to be.
> Also, my memory isn't as good as it used to be.
>
> On Sep 24, 2013, at 2:18 PM, "Gary AL9A" <al9a@mtaonline.net> wrote:
>
>> Dick,
>>
>> I can't think of any thing in WL that would keep you from jumping to
the
>> frequency of station in the Band Map with a double mouse click. Even
the
>> latest release works ok. Something else you might want to consider for
>> Band Map stations is creating some keyboard shortcuts to jump up and
down
>> the Band Map by a key stroke rather than a mouse click. Here are 4 I
have
>> setup for me.
>>
>> Ext_Divide --> EntryGotoNextMultDownBandmap (this is the divide key "/"
on
>> the numeric keypad)
>> MULTIPLY --> EntryGotoNextMultUpBandmap (this is the multiply key "*"
on
>> the numeric keypad)
>> SUBTRACT --> EntryGotoNextStnUpBandmap (this is the minus "-" key on
the
>> numeric keypad)
>> PAUSE --> EntryGotoNextStnDownBandmap (this is the Pause/Break key on
my
>> keyboard)
>>
>> With these four keyboard shortcut I can navigate up and down the Band
Map
>> to the next mult or the next good call much quicker than with a double
>> mouse click, especially when the Band Map is heavily populated as it is
>> sure to be in the CWWW. Good luck.
>>
>> 73,
>> Gary AL9A
>>
>> -----Original Message----- From: DickT-W0RAA
>> Sent: September 24, 2013 9:11 AM
>> To: Writelog Reflector
>> Subject: [WriteLog] Help with Bandmap
>>
>> I rarely if ever operate with the Bandmap in a contest. I am not able
to
>> click on a spotted call and have WL jump to the frequency in the
bandmap.
>> I have tried it in the past and it worked, but maybe with the new
version
>> just released is there a possibility of a possible glitch in WL? I am
>> running
>> version 11.13J. It has always worked before but not now. Anybody able
to
>> help? I'd appreciate it.
>>
>> Thanks & 73,
>>
>> Dick
>> W0RAA
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|