Check the *PTT* Port - make sure you have not assigned any port
for PTT (or have not assigned it to the same port as you are
using for the radio).
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support e-mail: support@microHAM.com
On 10/28/2013 4:12 PM, Richard Thorne wrote:
I'm cross posting to see if someone else has noticed this and has a
solution.
I'm setting up Writelog 11.14b for Nov. SS CW.
I have com5 selected in the Microkeyer Router for cw and use the same in
Writelog to communicate with K1EL.
As soon as I apply this setup in Writelog my K3 starts transmitting a
continuous carrier.
Has anyone else had or is having this problem?
Thanks
Rich - N5ZC
------------------------------------
This list is for the exchange of information about the use and operation of
microHAM products.
Anyone with specific hardware support issues should contact microHAM support at
mailto:support@microHAM.com.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/microHAM/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/microHAM/join
(Yahoo! ID required)
<*> To change settings via email:
microHAM-digest@yahoogroups.com
microHAM-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
microHAM-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://info.yahoo.com/legal/us/yahoo/utos/terms/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|