Steve:
1) make sure you have not selected "sound card PTT" in Router's
PTT tab. "Sound card PTT" will hold PTT on as long as the
sound card is open for output.
2) make sure you have set COMM PTT (software PTT commands) to
*NO* in Writelog's Setup | Ports dialog. The K3 has a bad
"race" condition when command PTT and hardware PTT are both
used. With a K1EL WinKey device WriteLog generates all mode
PTT using the WinKey PTT output (hardware PTT).
73,
... Joe, W4TV
On 11/1/2013 3:32 PM, Steve AI9T wrote:
Hello
I'm having a problem with Writelog DVK setup. I have everything working
as far as transmitting my recorded messages but for some reason the K3
will not unkey after the transmission. I have to press the Esc key.
Thought it might be RF but does it with almost no power as well. Anyone
else had this come up in the past?
I'm running Writelog version 11.14 on Windows 7 with a Microkeyer II
Thanks
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|