Rigblaster Advantage has a *single* serial port. That port can
be used for rig control (TxD/RxD), PTT (RTS) and CW (DTR) or it
can be used for RTTY (FSK=DTR, PTT=RTS) *but not both*.
If you are going to use RigBlaster Advantage for rig control and
RTTY, you must use AFSK (audio) for RTTY transmit.
73,
... Joe, W4TV
On 12/12/2013 11:33 PM, Andre VanWyk wrote:
I would very much like to hear from someone using writelog with a Rigblaster
advantage for both RTTY and rig control.
I am having a hard time with port settings and would like to get some pointers
from someone using this setup.
73
NJ0F
Sent from my iPhone
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|