> I still cannot get the band changes timer to work properly.
> It is set to the 10 min rule. ( set up for Multi-Single )
> I logged a mult on 17:07 Z and another mult at 17:10 z both on 20 meters.
> The mult timer counted down from 17:07 to 0:00 then restarted again for
> 3 min to 17:20. Then logged another mult at 17:22 and timer started
> over for
> another 10 min.
>
> Also the run station logged a station on 40 at 17:07 band change was
> marked ok.
>
> Logged another on the Run at 17:20 on 40 and timer started over for 40 ??
>
> Rechecked the ini file "BandChangesSetting=0". There must be something
> else.
>
> Using version 11.28J Aug.2015
>
> Help.
>
> Jim NU4Y / VP5DX
The scenario described as above was definitely broken in recent WriteLog
versions 11 and 12.
It is fixed in 11.41 and 12.10 as released a few days ago.
Wayne
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|