Re: [WriteLog] beta WriteLog/Flex-6000 series driver

[Steve AI9T <steve@ai9t.com>]

Wayne

I raised the output all the way to the right. It raised the audio a bit 
but still not as much as I like.
The TX Inhibit is Disabled on my 6700 and Maestro. So that is not the issue.

Steve AI9T


On 11/27/2017 10:02 PM, Wayne wrote:
> > I have it setup for SO2R RTTY. Using a 6700. I have it working OK but
> > have a couple issues. Running AFSK how do you increase the audio
> > output? I'm not driving it quite hard enough and without DAX I can't
> > figure out how to raise it.
> The audio level is set on your TNC. In MMTTY, its on the TX tab, the
> "Digital Output" slider. Push it to the right.
>
>
> > Secondly, if I try to do TX lockout Last one wins it quits TXing and I
> > have to uncheck the lockout setting to get it to TX again.
> How many 6700's do you have? If the answer is one, then turn OFF the
> lockouts option. That is for coordinating among multiple radios.
>
> Wayne
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
--
73

Steve AI9T

http://www.ai9t.com

AI9T DX Cluster

Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/