WriteLog
[Top] [All Lists]

Re: [WriteLog] Rig goes to 160M LSB instead of CW in Writelog IARU HF Co

To: "Arunas, LY2IJ" <ly2ij1@gmail.com>
Subject: Re: [WriteLog] Rig goes to 160M LSB instead of CW in Writelog IARU HF Contest module
From: Keith Beebe W3KB <keith@w3kb.net>
Date: Mon, 15 Jul 2019 17:15:02 +0000
List-post: <mailto:writelog@contesting.com>
Arunas LY2U/LY5E

Yes, that did it !   Edited the Subband in 160 Phone (SSB) and now it works 
correctly.

Many thanks,

Keith W3KB


From: Arunas, LY2IJ <ly2ij1@gmail.com>
Sent: July 15, 2019 8:00 AM
To: Keith Beebe W3KB <keith@w3kb.net>
Cc: writelog@contesting.com
Subject: Re: [WriteLog] Rig goes to 160M LSB instead of CW in Writelog IARU HF 
Contest module

HI,
I have same issue, new WL installation, editing 160 SSB subband from default 
1800-2000 to 1840-2000 fixes issue.
Just net to restart WL to accept changes, not easy in middle of contest.

73
Arunas LY2IJ/LY5E

On Mon, 15 Jul 2019 at 00:57, Keith Beebe W3KB 
<keith@w3kb.net<mailto:keith@w3kb.net>> wrote:
For whatever reason my rig, using Writelog in the recent IARU HF Championship 
contest, goes to LSB on 160 meters instead of CW when clicking on a spot in the 
Band Map.  I was operating only on CW, not Mixed mode (CW and SSB) in this 
contest therefore obviously clicking only in the CW frequencies on 160.

NOTE: All of the other bands 80 through 10 meters worked perfectly clicking on 
the CW spots from the Reverse Beacon Network. The rig stayed on CW on those 
bands.

For another reference, I just tested putting a frequency, say 1835, in the 
Entry Window itself and it does the same thing.  The rig goes to LSB instead of 
CW.

However, if I click the box to the left of the Entry Window it opens to the 
settings for Logging / Duping.  Putting a frequency, say 1825 on CW in that 
particular window and the rig goes to CW like it should.

Go back to the Entry Window and put in a 160 meter frequency it will go to LSB 
not CW !   Clicking on a 160 spot in the Band Map will also make it go to LSB 
not CW.

Why is only 160 meters having this issue?

Again, this is only the IARU HF contest "module" doing this and only on 160 
meters.  Yes, I also tried a few other modules (such as the one for the CWT's) 
and 160 CW works perfectly.

Keith W3KB













_______________________________________________
WriteLog mailing list
WriteLog@contesting.com<mailto:WriteLog@contesting.com>
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>