I want to thank you all for getting back to me with your comments..
Inadvertently, I failed to mention that this did in fact work in the past.. Let
me explain..
I've been using Writelog now for 7 years. I originally set it up and tied it
together using MMTTY and the MMTTY Plug in. During that time I worked plenty of
RTTY & CW contests and was able to send the preprogrammed messages in Writelog.
Flawlessly... So let me say this, I may have erred in my initial question about
Rttywrite doing the F-key transmission in CW mode. I should have acknowledged
that Writelog, along with using Rttyrite to read & I believe MMTTY's plug in
was handling the F-Key Message Tx'ing. What I was using up until I think late
last year was MMTTY's plug in, At some point I read that their plug in was no
longer supported and I had to convert to use XMMT. I can't remember when I
noticed the break, but by coincidence when I switched to XMMT the problem with
the CW F-keys started. Jim K0XU mentioned in one comment that it did work. If
not taking him out of context I have to believe that 100 percent. I know.. It
worked in the past so what has changed? Also, this is not about what reader
works best, that's everyones choice.. I agree the Writelog CW reader works fine
and may be better for some, but it scrolls to fast for me. I like how
Rttyrite's highlighting of the calls that Rttyrite does. To me it's more
simplified one click and I can work it... The reader in Rttyrite works fine and
with my old eyes makes things more productive for me. So, can I go back and
still use MMTTY's plug in? Is this where the break occurred? Do I really need
XMMT?
Steve Nordahl, NS3L On Tuesday, June 16, 2020, 10:41:05 AM EDT, Steve
Nordahl <ns3l@yahoo.com> wrote:
Hi all.. I have a ongoing problem.. When using Rttyrite in Writelog, it works
fine in FSK RTTY. It sends and hears RTTY no problem. The F-keys are also
sending no problem.
My issue is when I go to do CW. Rttyrite in Sound Board AFSK and CW mode
receives fine. However, if I hit any of the programmed F-keys nothing
happens..!! It does not key the rig..
Has anyone else had this occur? How do I get Rttyrite to send CW messages via
the F-keys?
Equipment is as follows. Win 10 laptop, Icom IC-7000, microHam MK II, Writelog
V12.50H
Hope someone can unravel this for me..
Steve NS3L
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|