Steve,
Compare your "Ports" settings to those in the example configuration
for microKEYER II and WriteLog available in the microKEYER II/III
area at www.microHAM-USA.com/Support.html.
Pay particular attention to the CW port and CW Keyer type.
Note: the example configuration was based on Writelog 11 - some
screens and options may have changed in WriteLog 12.
73,
... Joe, W4TV
On 2020-06-17 7:18 AM, Steve Nordahl via WriteLog wrote:
I want to thank you all for getting back to me with your comments..
Inadvertently, I failed to mention that this did in fact work in the past.. Let
me explain..
I've been using Writelog now for 7 years. I originally set it up and tied it together
using MMTTY and the MMTTY Plug in. During that time I worked plenty of RTTY & CW
contests and was able to send the preprogrammed messages in Writelog. Flawlessly... So
let me say this, I may have erred in my initial question about Rttywrite doing the
F-key transmission in CW mode. I should have acknowledged that Writelog, along with
using Rttyrite to read & I believe MMTTY's plug in was handling the F-Key Message
Tx'ing. What I was using up until I think late last year was MMTTY's plug in, At some
point I read that their plug in was no longer supported and I had to convert to use
XMMT. I can't remember when I noticed the break, but by coincidence when I switched to
XMMT the problem with the CW F-keys started. Jim K0XU mentioned in one comment that it
did work. If not taking him out of context I have to believe that 100 percent. I know..
It worked in the past so what has changed? Also, this is not about what reader works
best, that's everyones choice.. I agree the Writelog CW reader works fine and may be
better for some, but it scrolls to fast for me. I like how Rttyrite's highlighting of
the calls that Rttyrite does. To me it's more simplified one click and I can work it...
The reader in Rttyrite works fine and with my old eyes makes things more productive for
me. So, can I go back and still use MMTTY's plug in? Is this where the break occurred?
Do I really need XMMT?
Steve Nordahl, NS3L On Tuesday, June 16, 2020, 10:41:05 AM EDT, Steve Nordahl
<ns3l@yahoo.com> wrote:
Hi all.. I have a ongoing problem.. When using Rttyrite in Writelog, it works fine in FSK RTTY. It sends and hears RTTY no problem. The F-keys are also sending no problem.
My issue is when I go to do CW. Rttyrite in Sound Board AFSK and CW mode receives fine. However, if I hit any of the programmed F-keys nothing happens..!! It does not key the rig..
Has anyone else had this occur? How do I get Rttyrite to send CW messages via the F-keys?
Equipment is as follows. Win 10 laptop, Icom IC-7000, microHam MK II, Writelog V12.50H
Hope someone can unravel this for me..
Steve NS3L
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|