WriteLog
[Top] [All Lists]

Re: [WriteLog] TU NOW MESSAGE

To: <ed@w0yk.com>, <WriteLog@contesting.com>
Subject: Re: [WriteLog] TU NOW MESSAGE
From: "Robert Wood, P.E. \(retired\)" <woodr90@gmail.com>
Date: Mon, 4 Jan 2021 14:46:35 -0600
List-post: <mailto:writelog@contesting.com>
Post - Contest:
Thankful for this reflector and kind words of mentors helping out!

Ed & Jim,  THANKS For replies and help line on this 
BTW, was reviewing Ed's messages and using those as guide

Before the contest implemented following two lines in writelog.ini (Tnx NU4Y)

[RttyContextMenuEntries] 
1=PUSHCALL

this took menu out of right mouse click and caused push call on right click 
impressive and great option, worked great! 

Next on pop call sign out,
I've used writelog for years but just didn't seem to recall that on the, 
TU NOW message, then hit F key for message CALLSIGN and report, writelog would 
automatically pop from Q 
like WOW 
This worked like a charm and just when I thought the happiness factor with 
writelog was way over the top, other plus.
(That's probably in help file, just missed it)

73 and Good DX,  W5AJ
Robert
Midland, Texas
http://w5aj.eqth.net/Infinity.pdf

-----Original Message-----
From: Ed Muns [mailto:ed@w0yk.com] 
Sent: Saturday, January 02, 2021 10:42 AM
To: 'Robert Wood, P.E. (retired)' <woodr90@gmail.com>; WriteLog@contesting.com
Subject: RE: [WriteLog] TU NOW MESSAGE

[Here is the properly formatted version of my post.  The first post got nuked 
somehow.]

I do it with the following message:

     TU %C, NOW %L

This is F8, mapped to SEMICOLON.   My normal Run Exchange message is F5, mapped 
to APOSTROPHE.  Thus,  all I do is tap SEMICOLON and APOSTROPHE in rapid 
succession, then turn my attention to a second radio or the other VFO for SO2V. 
 The other stations on frequency print:

     TU AA5AU,  NOW
     W5AJ 599 CA CA

Normally, I'm not doing this but just sending F6, my Run QSL message, which is 
sent by ENTER, since I use ESM.  Thus, all three keys are adjacent to each 
other and they are all I use for 99% of my Run QSOs. 

For S&P, my call is mapped to OPEN SQUARE BRACKET and my S&P Exchange is mapped 
to CLOSE SQUARE BRACKET.  Thus, my S&P messages are all right above my 3 Run 
messages.

73,
Ed W0YK

-----Original Message-----
From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Ed W0YK
Sent: 02 January, 2021 03:56
To: Robert Wood, P.E. (retired) <woodr90@gmail.com>; WriteLog@contesting.com
Subject: Re: [WriteLog] TU NOW MESSAGE

I do it with the following message:     TU %C, NOW %LThis is F8, mapped to 
SEMICOLON.   My normal Run Exchange message is F5, mapped to APOSTROPHE.  Thus, 
 all I do is tap SEMICOLON and APOSTROPHE in rapid succession, then turn my 
attention to a second radio or the other VFO for SO2V.  The other stations on 
frequency print:     TU AA5AU,  NOW     W5AJ 599 CA CANormally, I'm not doing 
this but just sending F6, my Run QSL message which is sent by ENTER, since I 
use ESM.  Thus, all three keys are adjacent to each other and they are all I 
use for 99% of my Run QSOs. For S&P, my call is mapped to OPEN SQUARE BRACKET 
and my S&P Exchange is mapped to CLOSE SQUARE BRACKET.  Thus, my S&P messages 
are all right above my 3 Run messages. 73,Ed W0YK
-------- Original message --------From: "Robert Wood, P.E. (retired)" 
<woodr90@gmail.com> Date: 1/1/21  23:14  (GMT-08:00) To: 
WriteLog@contesting.com Subject: [WriteLog] TU NOW MESSAGE This question deals 
with TU but not calling CQ instead working next stationin Que I have the "=" 
key setup in writelog to pop next callsign from QUE  should be a means to use 
the = key board shortcut in message such that apreprogrammed message could look 
likeLET'S ASSUME THAT %= would Do that %R TU %L NOW %= %C 599 TX TX %E did try 
%= in a message, it does pop from the QUE but the message sent is amess..also 
appears that what callsign is in entry field for RTTY is the one sentfor that 
Message using %C (doesn't read in next call) QUESTION:is there method for one 
message to send TU or %C TU, the callsign that of the station being logged Then 
the message pops from QUE and sends NOWThen sends the new callsign in entry 
window and report otherwise it's three keystrokes (seems)TU messageKey to pop 
from queTh
 en use report message to send report to next callsign   73 W5AJ  
RobertMidland, Texashttp://w5aj.eqth.net/Infinity.pdf 
_______________________________________________WriteLog mailing 
listWriteLog@contesting.comhttp://lists.contesting.com/mailman/listinfo/writelogWriteLog
 on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>