This is a multi-part message in MIME format.
------=_NextPart_000_0052_01BD8C90.4FC91780
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
After I got my cable hooked up and checked with a couple of known good =
programs (F6DEX's excellent Soft990 and PDA's LOGIC), I modified my =
program to work with the MP. =20
Most of the changes were minor but the frequency report is a very =
different format. I had trouble interpreting the manual (the example is =
either wrong or I don't understand it) but finally got it working. The =
frequency in Hz divided by .625 is returned in a 4 byte structure. You =
just have to arrange the bytes right and multiply by .625 (or .000625 to =
get the answer in kHz).
The info to set the filters is also not working according to the book. =
It looks like the 9 they say to use to enable the 2nd if 6k filter =
should be a 4. I also can't get any response using the 3rd if codes =
(80-84) they say to use. Any help on this?
73, Ed
Ed Jensen, K5ED, El Paso, TX, k5ed@dzn.com
------=_NextPart_000_0052_01BD8C90.4FC91780
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>
<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.71.2016.0"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D3>After I got my cable hooked up and checked with a =
couple of=20
known good programs (F6DEX's excellent Soft990 and PDA's LOGIC), I =
modified my=20
program to work with the MP. </FONT></DIV>
<DIV><FONT size=3D3></FONT> </DIV>
<DIV><FONT size=3D3>Most of the changes were minor but the frequency =
report is a=20
very different format. I had trouble interpreting the manual (the =
example=20
is either wrong or I don't understand it) but finally got it =
working. The=20
frequency in Hz divided by .625 is returned in a 4 byte structure. =
You=20
just have to arrange the bytes right and multiply by .625 (or .000625 to =
get the=20
answer in kHz).</FONT></DIV>
<DIV><FONT size=3D3></FONT> </DIV>
<DIV><FONT size=3D3>The info to set the filters is also not working =
according to=20
the book. It looks like the 9 they say to use to enable the 2nd if =
6k=20
filter should be a 4. I also can't get any response using the 3rd =
if codes=20
(80-84) they say to use. Any help on this?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT color=3D#000000><FONT size=3D3>73, Ed</FONT></FONT><FONT=20
size=3D3></FONT> </DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000000 face=3D"" size=3D3>Ed Jensen, K5ED, El Paso, =
TX, <A=20
href=3D"mailto:k5ed@dzn.com";>k5ed@dzn.com</A></FONT></DIV></BODY></HTML>
------=_NextPart_000_0052_01BD8C90.4FC91780--
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|