Yaesu
[Top] [All Lists]

[Yaesu] Building a CAT interface

To: <yaesu@contesting.com>
Subject: [Yaesu] Building a CAT interface
From: lanej@provide.net (John Lane)
Date: Sun, 31 Jan 1999 11:53:13 -0000

The 757 needs TTL logic level inputs for it's CATt interface.  I built an
interface using the Maxim MAX232 chip.  A very simple arrangement.  I
believe there was an article in QST a few years back or you can request the
design notes from Maxim for sample circuits.  (A very good company BTW.)
W8KX

>
>I have a 757GX, and would like to know if it is possibile to build a CAT
>interface for the radio?  I believe my radio has three pins coming out the
>back - are these simply RS-232 send, receive, and ground pins?
>
>73 and thanks - Matt
>--------------------
>Matt Werner, KB0KQA
>http://www.cp.duluth.mn.us/~kb0kqa
>kb0kqa@cp.duluth.mn.us
>
>
>--
>FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
>Submissions:              yaesu@contesting.com
>Administrative requests:  yaesu-REQUEST@contesting.com
>Problems:                 owner-yaesu@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>