I think the problem it`s on the LPF Unit, subreceiver works ok, because
it`s not going through that unit, please do something.... activate and
deactivate TUNER on those bands that you are having the problem....
De: firstname.lastname@example.org [mailto:email@example.com] En
nombre de Greg Clark
Enviado el: lunes, 08 de julio de 2002 12:21
Para: Marko Markkanen; firstname.lastname@example.org
Asunto: Re: [Yaesu] FT-1000MP failure
I've found myself in a similar situation but with my Mark V. It is
about 7 months
old and has been sitting idle for about 3 weeks.
I made a few Q's with it this weekend and let it sit idle for an hour.
main receiver is now totally gone, no receive, no hiss, no transmit.
does work on some bands, but it depends on what band the main receiver
A master reset did nothing. A call to Yaesu resulted in the same.
So, it's now in the hands of UPS and the world of warranty repair.
I'll report on progress or lack there-of.
>I found yersterday that my MP did not receive or transmit on 20m.
>TX/RX is dead between 7.5-14.5 MHz... Immediately when I hear relay
at those limits, RX works OK and TX works where it should work. >TX
Sub receiver works properly. Reset did not help.
>I opened the radio and checked for bad flat cable connections etc. I
tried if RX can hear anything when signal is connected to cable >leaving
pass unit (cable that connects to J3502)... Nothing between >7.5 and
elsewhere nice signal.
>73, Marko - AK4XX - OH7KD
>--- StripMime Report -- processed MIME parts ---
> text/plain (text body -- kept)
>Yaesu mailing list
Yaesu mailing list