[Yaesu] ft101zd

[jplourd@attglobal.net (bob plourde)]

I have an F101ZD dedicated to PSK31.  Using a home brew interface and
VOX I find no combination of mike gain and sound card volume that will
produce a consistent output of 30W.  I get either zero or the full
100W.  The only solution is to detune the load control a bit so max
power is <40W and then raise the mike or sound card levels.  My question
here is there a potential problem with running the rig a bit out of
tune.

Bob Plourde  WB1ENV