>
> Wondering if anyone has had much success in resoldering the filament pins
>on a 3-500Z? A friend of mine has a couple tubes that the solder has melted
>out of the pins due to faulty sockets. He is wondering if there is any
>special technique that has worked well for any of you or are the tubes a
>write-off?
>
Lay tube horiz., remove old solder with solder-wick, apply liquid rosin
flux with syringe, let dry, resolder with 6% silver/94% tin solder, add
helper clip-springs on pins 1 and 5 of tube sockets, polish contact
survaces lightly with extra-fine steel wool.
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|