Amps Mailing List (date)

March 31, 1999

[AMPS] Resoldering 3-500Z Filament Pins ??, Rich Measures, 21:35
[AMPS] Resoldering 3-500Z Filament Pins ??, Mike Rhodes, 18:12
[AMPS] 3CX3000A7, Paul Hellenberg k4ja, 16:34
[AMPS] Re: QST tests KW tuners, Roy Koeppe, 16:04
[AMPS] Tuners and VSWR, Radiodan W7RF, 15:51
[AMPS] Use of the Johnson Matchbox, Mike Sato, 15:47
[AMPS] Use of the Johnson Matchbox, Len Schaier, 15:30
[AMPS] Grid driven triodes, Rich Measures, 12:33
[AMPS] Grid driven triodes, Rich Measures, 12:33
[AMPS] TRIAC, Monty Taylor, 11:15
[AMPS] LP Filter Performance, km1h@juno.com, 09:42
[AMPS] Grid driven triodes, Peter Chadwick, 08:49
[AMPS] Grid driven triodes, William L. Fuqua III, 08:38
[AMPS] Re:HV on tube w/o filament voltage, Rich Measures, 05:26
[AMPS] Grid driven triodes, Rich Measures, 05:26
[AMPS] Use of the Johnson Matchbox, Rich Measures, 05:26
[AMPS] Blower speed reduction, Peter Chadwick, 04:13
[AMPS] Use of the Johnson Matchbox, Peter Chadwick, 04:08
[AMPS] Grid driven triodes, Peter Chadwick, 03:52
[AMPS] Re:HV on tube w/o filament voltage, Peter Chadwick, 03:46
[AMPS] Amp opinion/infomation requested ASAP!!, Steve Thompson, 01:07
[AMPS] Blower speed reduction, Vic Rosenthal, 00:52

March 30, 1999

[AMPS] Cathode Impedance Measurements, Phil T. (VE3OZZ), 23:10
[AMPS] LP Filter Performance, Jon Ogden, 18:14
[AMPS] Cathode Impedance Measurements, Jon Ogden, 18:08
[AMPS] Use of the Johnson Matchbox, Jim Reid, 14:24
[AMPS] Grid driven triodes, Rich Measures, 14:23
[AMPS] Re:HV on tube w/o filament voltage, Rich Measures, 14:13
[AMPS] Amp opinion/infomation requested ASAP!!, Rich Measures, 14:13
[AMPS] Amp opinion/infomation requested ASAP!!, Vic Rosenthal, 13:19
[AMPS] Re:HV on tube w/o filament voltage, Richard W. Ehrhorn, 12:17
[AMPS] Amp opinion/infomation requested ASAP!!, Vic Rosenthal, 12:03
FW: [AMPS] Re:HV on tube w/o filament voltage, Richard W. Ehrhorn, 11:49
[AMPS] LP Filter Performance, Peter Chadwick, 11:27
[AMPS] Grid driven triodes, Peter Chadwick, 11:22
[AMPS] Amp opinion/infomation requested ASAP!!, John Fielding, 11:09
[AMPS] Grid driven triodes, Rich Measures, 11:03
[AMPS] LP Filter Performance, km1h@juno.com, 10:59
[AMPS] Tuners and VSWR, km1h@juno.com, 10:39
[AMPS] Amp opinion/infomation requested ASAP!!, km1h@juno.com, 10:01
[AMPS] Re:HV on tube w/o filament voltage, km1h@juno.com, 09:34
[AMPS] Grid driven triodes, Joe Subich, W8IK/4, 09:07
[AMPS] Cathode Impedance Measurements, km1h@juno.com, 09:07
[AMPS] Grid driven triodes, William L. Fuqua III, 08:34
[AMPS] Amp opinion/infomation requested ASAP!!, Peter Chadwick, 07:38
[AMPS] Re:HV on tube w/o filament voltage, Peter Chadwick, 07:15
[AMPS] Amp opinion/infomation requested ASAP!!, Steve Thompson, 01:49
[AMPS] HV on tube w/o filament voltage, Bob Marston, 01:27

March 29, 1999

[AMPS] Cathode Impedance Measurements, Rich Measures, 21:26
[AMPS] Amp opinion/infomation requested ASAP!!, Radiodan W7RF, 19:05
[AMPS] Amp opinion/infomation requested ASAP!!, Radiodan W7RF, 18:47
[AMPS] 3cx1200(any), zeitler@ibm.net, 18:05
[AMPS] 3cx3000a7 wire manual, Radiodan W7RF, 17:56
[AMPS] Amp opinion/infomation requested ASAP!!, Jon Ogden, 17:40
[AMPS] Cathode Impedance Measurements, Jon Ogden, 17:33
[AMPS] Cathode Impedance Measurements, Rich Measures, 16:25
[AMPS] 3cx3000a7 wire manual, HG Lundgren sm2nog, 15:07
[AMPS] Re:HV on tube w/o filament voltage, Jon Ogden, 13:08
[AMPS] Re:HV on tube w/o filament voltage, yo3ctk@qsl.net, 12:11
[AMPS] HV on tube w/o filament voltage, Jon Ogden, 11:59
[AMPS] Cathode Impedance Measurements, Jon Ogden, 11:52
[AMPS] Cathode Impedance Measurements, Jon Ogden, 11:45
[AMPS] Cathode Impedance Measurements, Jon Ogden, 11:31
[AMPS] Cathode Impedance Measurements, Rich Measures, 10:31
[AMPS] Cathode Impedance Measurements, km1h@juno.com, 10:19
[AMPS] Startup after long storage, km1h@juno.com, 10:07
[AMPS] Amp opinion/infomation requested ASAP!!, km1h@juno.com, 10:01
[AMPS] Cathode Impedance Measurements, Peter Chadwick, 09:37
[AMPS] Cathode Impedance Measurements, Rich Measures, 08:54
[AMPS] PA loading and tube life, Ian White, G3SEK, 08:44
[AMPS] Re:HV on tube w/o filament voltage, George T. Daughters, 04:36
[AMPS] HV on tube w/o filament voltage, George T. Daughters, 04:30
[AMPS] Cathode Impedance Measurements, Peter Chadwick, 03:28
[AMPS] PA loading and tube life, Graham Jones, 01:27

March 28, 1999

[AMPS] Amp opinion/infomation requested ASAP!!, Rich Measures, 23:26
[AMPS] Amp opinion/infomation requested ASAP!!, <dick.green@valley.net (Dick Green), 21:47
[AMPS] Amp opinion/infomation requested ASAP!!, Rich Measures, 20:57
[AMPS] PA loading and tube life, Rich Measures, 20:39
[AMPS] Amp opinion/infomation requested ASAP!!, km1h@juno.com, 20:28
[AMPS] Amp opinion/infomation requested ASAP!!, Pete Smith, 20:20
[AMPS] Amp opinion/infomation requested ASAP!!, Radiodan W7RF, 20:05
[AMPS] PA loading and tube life, Graham Jones, 19:36
[AMPS] Amp opinion/infomation requested ASAP!!, Graham Jones, 19:15
[AMPS] Amp opinion/infomation requested ASAP!!, km1h@juno.com, 10:44
[AMPS] Daiwa Remote Power Meter Head, Morel Grunberg, 00:47

March 27, 1999

[AMPS] Amp opinion/infomation requested ASAP!!, Greg Gobleman, 20:55
[AMPS] Drake L-7 Help Solution, Joseph J. Duerbusch, 17:46
[AMPS] test, Jeff Weinberg W8CQ, 12:52
[AMPS] SB200 with Kenwood TS450, Rich Measures, 11:24
[AMPS] SB200 with Kenwood TS450, km1h@juno.com, 11:02
[AMPS] Re: TS-450 Interface SB-200, Roy Koeppe, 10:54
[AMPS] Amp opinion/infomation requested ASAP!!, km1h@juno.com, 10:54
[AMPS] SB200 with Kenwood TS450, brad roope, 08:50
[AMPS] Cathode Impedance Measurements, Rich Measures, 02:13
[AMPS] Amp opinion/infomation requested ASAP!!, Michael J. Baker, 00:16

March 26, 1999

[AMPS] Cathode Impedance Measurements, Richard W. Ehrhorn, 20:06
[AMPS] Cathode Impedance Measurements, John / NS1Z, 18:04
[AMPS] Transformer source, Vic Rosenthal, 17:39
[AMPS] Harbach, km1h@juno.com, 16:22
[AMPS] PS caps, km1h@juno.com, 15:34
[AMPS] Filament choke rod material, km1h@juno.com, 12:49
[AMPS] 4 off 4CX250BM Designs, km1h@juno.com, 12:42
[AMPS] Need some Drake L-7 Help, km1h@juno.com, 10:20
[AMPS] SB-200 Problem (again), km1h@juno.com, 09:50
[AMPS] Cathode Impedance Measurements, km1h@juno.com, 09:21
[AMPS] Harbach, Peter Chadwick, 09:12
[AMPS] Harbach, Roy Koeppe, 09:07
[AMPS] 2m plus HF, G3CWI@aol.com, 03:15
[AMPS] Ultrasonic Cleaner parts, Skip S Isaham, 02:03
[AMPS] cat out of the bag..., Skip S Isaham, 02:03

March 25, 1999

[AMPS] PS caps, Vic Rosenthal, 20:17
[AMPS] Re: Cath Z Measurements, Roy Koeppe, 18:01
[AMPS] Cathode Impedance Measurements, oz5tg, 16:52
[AMPS] tubes, Larry L. Ravlin, 16:18
[AMPS] PS caps, km1h@juno.com, 16:16
[AMPS] Solid State Relays/soft start, km1h@juno.com, 13:58
[AMPS] Cathode Impedance Measurements, Terry Gaiser, 12:34
[AMPS] Daiwa Remote Power Meter Head, Jon Ogden, 12:22
[AMPS] Cathode Impedance Measurements, Jon Ogden, 12:19
[AMPS] Fwd: [Yaesu] F.S. Eimac SK-800A socket for 4CX1000A series, Jon Ogden, 09:52
[AMPS] Harbach mod instruction, Y. Park �ڿ뼷, 06:03
[AMPS] SB-200 Problem (again), Peter Chadwick, 05:34
[AMPS] Ultrasonic Cleaner, Greg Papworth, 02:48

March 24, 1999

[AMPS] Svetlana 4CX800A, Paul Christensen, 22:43
[AMPS] SB-200 Problem (again), Marty Tippin, 22:39
[AMPS] Proper wiring: 220VAC plugs/outlets, <dick.green@valley.net (Dick Green), 22:16
[AMPS] 4 off 4CX250BM Designs, Rich Measures, 22:14
[AMPS] HV fuse + glitch resistor, f117ab@ameritech.net, 20:53
[AMPS] Take a look at the how the Big Boys do it, Bill Vogler, 19:33
[AMPS] 4 off 4CX250BM Designs, Graham Jones, 18:33
[AMPS] Need some Drake L-7 Help, Joseph J. Duerbusch, 17:55
[AMPS] HV fuse + glitch resistor, f117ab@ameritech.net, 16:15
[AMPS] 4 off 4CX250BM Designs, G3CWI@aol.com, 12:07
[AMPS] Harbach mod instruction, Y. Park �ڿ뼷, 10:50
[AMPS] 70cm capaty with EIMAC 8938, Carsten Esch, 03:52
[AMPS] Re: Fil Chokes Rod Material, Roy Koeppe, 02:45
[AMPS] Ultrasonic Cleaner, Mike Michon, 01:59

March 23, 1999

[AMPS] Collins 30L-1 manual now online, Doug Hall, 22:38
[AMPS] Fuses, Larry Molitor, 20:45
[AMPS] Filament choke rod material, Vic Rosenthal, 17:36
[AMPS] Re: Re[CQ Contest}RE: [TowerTalk] 22VAC to 2 110VAC circuits, Rich Measures, 15:16
[AMPS] Blower Noise, Rich Measures, 15:16
[AMPS] Blower Noise, marv gonsior, 14:00
[AMPS] Ultrasonic Cleaner, marv gonsior, 13:43
[AMPS] Fuses, Richard W. Ehrhorn, 13:29
[AMPS] Re: Re[CQ Contest}RE: [TowerTalk] 22VAC to 2 110VAC circuits, <dick.green@valley.net (Dick Green), 12:38
[AMPS] AL-1200 QSK and IC-756 interconnections, Jerry Flanders, 12:37
[Fwd: [AMPS] [Fwd: TL-922A power problem]], Rich Measures, 12:11
[AMPS] Solid state relays and HV fusing, Peter Chadwick, 11:06
[AMPS] Solid state relays and HV fusing, Phil T. (VE3OZZ), 10:22
[AMPS] Solid state relays and HV fusing, Mark Marsden, 05:09
[AMPS] CW amplifier tubes, Zdzislaw R Sawicki, 04:38
[AMPS] WTB: TH308 / TH328 tubes, Carsten Esch, 02:53
[Fwd: [AMPS] [Fwd: TL-922A power problem]], lerxst, 02:01
[AMPS] phantom plate and grid current, Vic Rosenthal, 02:00
[AMPS] phantom plate and grid current, zeitler@ibm.net, 01:52
[AMPS] KA2YKC@aol.com: 3cx1200 ps testing first, Skip S Isaham, 00:40
[AMPS] Perkin Elmer.. .schematic, Skip S Isaham, 00:40

March 22, 1999

[Fwd: [AMPS] [Fwd: TL-922A power problem]], k6ll@juno.com, 21:49
[AMPS] Fuses, Larry Molitor, 21:05
[AMPS] TS-520S, zeitler@ibm.net, 19:24
[AMPS] F.S. Eimac SK-606 Chimneys, Alan Gray, 19:08
[AMPS] INFO NEEDED ON LK-500 ZB, paul, 17:23
[AMPS] High watt Zeners !, Ian White, G3SEK, 16:23
[AMPS] [Fwd: TL-922A power problem], Jerry Kroh, 14:39
[AMPS] Fuses, Rich Measures, 13:22
[AMPS] [Fwd: TL-922A power problem], lerxst, 13:15
[AMPS] Re: High Watt Zeners, Roy Koeppe, 12:57
[AMPS] Re: High Watt Zeners, Roy Koeppe, 12:44
No subject, John T. M. Lyles, 12:28
[AMPS] Fuses, Peter Chadwick, 12:08
[AMPS] Fuses, Rich Measures, 11:38
[AMPS] SB-200 Problem, Rich Measures, 11:38
[AMPS] High watt Zeners !, Peter Chadwick, 10:19
[AMPS] Unitrode & Microsemi PIN diodes, Jon Ogden, 10:12
[AMPS] Re: High watt Zeners, Roy Koeppe, 10:01
[AMPS] SB-200 Problem, Tippin, Martin, 09:52
[AMPS] Need Plasma Generator schematic, William L. Fuqua III, 09:44
[AMPS] Fuses, Peter Chadwick, 09:37
[AMPS] Unitrode & Microsemi PIN diodes, Peter Chadwick, 09:34
[AMPS] Unitrode & Microsemi PIN diodes, Phil T. (VE3OZZ), 09:32
[AMPS] Unitrode & Microsemi PIN diodes, John Fielding, 09:21
[AMPS] PIN diodes, Peter Chadwick, 07:36
[AMPS] Solid State Relays/soft start, Peter Chadwick, 05:45
[AMPS] Alpha 89 SWR protection, Peter Chadwick, 05:30
[AMPS] CW amplifier tubes, Peter Chadwick, 04:53
[AMPS] amplifier tubes, Skip S Isaham, 01:42
[AMPS] PS caps, Vic Rosenthal, 00:32

March 21, 1999

[AMPS] thyratron service..., Bill Henderson, 22:56
[AMPS] misc topics, Jon Ogden, 22:49
[AMPS] High watt Zeners !, k6ll@juno.com, 22:06
[AMPS] Solid State Relays/soft start, Phil Clements, 21:56
[AMPS] Info needed: Soild Statte Relays, Phil Clements, 21:45
[AMPS] High watt Zeners !, Phil T. (VE3OZZ), 21:02
[AMPS] Solid State Relays/soft start, Phil T. (VE3OZZ), 20:18
[AMPS] Big Tetrodes at UHF, Ian White, G3SEK, 19:29
[AMPS] Info needed: Soild Statte Relays, Ian White, G3SEK, 18:48
[AMPS] More on the SB220, Ian White, G3SEK, 18:40
[AMPS] Re: cheap tubes--good power, zeitler@ibm.net, 18:30
[AMPS] Big Tetrodes at UHF, Peter Sundberg, 16:27
[AMPS] Info needed: Soild Statte Relays, Phil Clements, 15:36
[AMPS] Follow Up on the SB-220 Follow UP, km1h@juno.com, 14:43
[AMPS] Big Tetrodes at UHF, km1h@juno.com, 14:37
[AMPS] Info needed: Soild Statte Relays, Arthur Moe, 13:26
[AMPS] Re: cheap tubes--good power, km1h@juno.com, 12:44
[AMPS] More on the SB220, km1h@juno.com, 12:04
[AMPS] More on the SB220, km1h@juno.com, 11:25
[AMPS] Alpha 89 SWR protection, km1h@juno.com, 10:57
[AMPS] More on the SB220, km1h@juno.com, 10:10
[AMPS] Re: CW amplifier tubes, km1h@juno.com, 09:58

March 20, 1999

[AMPS] misc topics, w3am@juno.com, 23:12
[AMPS] Gates BC-5P, Larry L. Ravlin, 22:31
[AMPS] TEST ignore, Phil T. (VE3OZZ), 21:14
[AMPS] Trade: Alpha 77SX, Rich Hallman, 20:25
FW: [AMPS] Alpha 89 SWR protection, Richard W. Ehrhorn, 18:07
[AMPS] UCSXF-1000 Vacuum Variable, af1z@juno.com, 17:33
[AMPS] Follow Up on the SB-220 Follow UP, Walter Fairclough, 16:20
[AMPS] More on the SB220, Peter Sundberg, 15:41
[AMPS] cheap tubes--good power, Carsten Groen, 13:00
[AMPS] cheap tubes--good power, zeitler@ibm.net, 12:28
[AMPS] Congrats SM2CEW, Gilmer, Mike, 10:22
[AMPS] Congrats SM2CEW, Jon Ogden, 09:57
[AMPS] More on the SB220, Ian White, G3SEK, 07:03
[AMPS] thyratron service..., Skip S Isaham, 05:19
[AMPS] Alpha 89 SWR protection, <dick.green@valley.net (Dick Green), 01:12

March 19, 1999

[AMPS] Power Supply Progress & a question, Michael J. Baker, 23:06
[AMPS] More on the SB220, Ian White, G3SEK, 19:25
[AMPS] More on the SB220, Richard W. Ehrhorn, 19:02
FW: [AMPS] Alpha 89 SWR protection, Richard W. Ehrhorn, 19:01
[AMPS] Re: CW amplifier tubes, Martin Ellis, 18:41
[AMPS] CW amplifier tubes, km1h@juno.com, 17:39
[AMPS] CW amplifier tubes, km1h@juno.com, 17:37
[AMPS] Power Supply Progress & a question, Phil Clements, 16:33
[AMPS] SB-220 info, f117ab@ameritech.net, 16:07
[AMPS] SB-220 info, Vic Rosenthal, 15:58
[AMPS] PentaLabs Socket/Chimney FS, Edward Gable, 15:51
[AMPS] 3cx1200, Mike Michon, 15:22
[AMPS] More on the SB220, km1h@juno.com, 14:59
[AMPS] CW amplifier tubes, Vic Rosenthal, 13:03
[AMPS] CW amplifier tubes, Rich Measures, 12:51
[AMPS] CW amplifier tubes, Vic Rosenthal, 12:40
[AMPS] Instant ON.., km1h@juno.com, 11:58
[AMPS] CW amplifier tubes, km1h@juno.com, 10:49
[AMPS] Alpha 91B Amplifier, Carl A. Smidt, 10:29
[AMPS] Follow Up on the SB-220 Follow UP, Rich Measures, 10:24
[AMPS] Band switch, Mark Marsden, 09:47
[AMPS] Loading Capacitor, K4SO@aol.com, 09:13
[AMPS] Follow Up on the SB-220 Follow UP, Jon Ogden, 08:32
[AMPS] More on the SB220, Rich Measures, 06:04
[AMPS] 3cx1200, Rich Measures, 06:04
[AMPS] Follow Up on the SB-220 Follow UP, Rich Measures, 06:04
[AMPS] AL-1200 comments please, Rich Measures, 06:04
[AMPS] Follow Up on the SB-220 Follow UP, Rich Measures, 06:04
[AMPS] Chokes and Dipping chokes?, Rich Measures, 06:04
[AMPS] Instant ON.., Peter Chadwick, 04:47
[AMPS] misc topics, Peter Chadwick, 04:21
[AMPS] Chokes and Dipping chokes?, Peter Chadwick, 04:04
[AMPS] Power Supply Progress & a question, km1h@juno.com, 02:07
[AMPS] More on the SB220, km1h@juno.com, 02:07
[AMPS] Chokes and Dipping chokes?, km1h@juno.com, 01:32
[AMPS] Follow Up on the SB-220 Follow UP, km1h@juno.com, 01:31
[AMPS] Instant ON.., km1h@juno.com, 01:25
[AMPS] Instant ON.., km1h@juno.com, 01:22
[AMPS] Follow Up on the SB-220 Follow UP, km1h@juno.com, 00:58
[AMPS] CW amplifier tubes, Vic Rosenthal, 00:43
[AMPS] Alpha 89 SWR protection, <dick.green@valley.net (Dick Green), 00:41
[AMPS] AL-1200 comments please, <dick.green@valley.net (Dick Green), 00:37
[AMPS] Power Supply Progress & a question, Doug Hall, 00:27
[AMPS] 3cx1200, km1h@juno.com, 00:15
[AMPS] Follow Up on the SB-220 Follow UP, km1h@juno.com, 00:10

March 18, 1999

[AMPS] Follow Up on the SB-220 Follow UP, Walter Fairclough, 23:17
[AMPS] 3cx1200, KA2YKC@aol.com, 22:53
[AMPS] Instant ON.., Dave Bernstein, 22:25
[AMPS] Instant ON.., Paul Christensen, 20:54
[AMPS] Follow Up on the SB-220 Follow UP, Rich Measures, 20:45
[AMPS] Chokes and Dipping chokes?, Rich Measures, 20:17
[AMPS] Instant ON.., <dick.green@valley.net (Dick Green), 20:04
[AMPS] More on the SB220, Ian White, G3SEK, 19:35
[AMPS] Instant ON.., Larry Molitor, 18:15
[AMPS] Instant ON.., Terry Gaiser, 18:12
[AMPS] Follow Up on the SB-220 Follow UP, Jon Ogden, 18:08
[AMPS] Follow Up on the SB-220 Follow UP, Rich Measures, 17:40
[AMPS] Ryker may have caused the SB-220 failure, Bob Bruno, 17:29
[AMPS] Follow Up on the SB-220 Follow UP, Jon Ogden, 17:07
[AMPS] Chokes and Dipping chokes?, Jon Ogden, 16:53
[AMPS] Ryker may have caused the SB-220 failure, Jon Ogden, 16:46
[AMPS] Instant ON.., Jon Ogden, 16:26
[AMPS] Follow Up on the SB-220 Follow UP, Gilmer, Mike, 15:08
[AMPS] Follow Up on the SB-220 Follow UP, Rich Measures, 14:43
[AMPS] SGC 500 or FL-7000 ?'s, Steve Freeman, 14:30
[AMPS] Chokes and Dipping chokes?, Rich Measures, 14:12
[AMPS] More on the SB220, Rich Measures, 14:12
[AMPS] strange idling current, Rich Measures, 14:12
[AMPS] HV connectors again..., Rich Measures, 14:12
[AMPS] Follow Up on the SB-220 Follow UP, Rich Measures, 14:12
[AMPS] Chokes and Dipping chokes?, Rich Measures, 14:12
[AMPS] misc topics, John Fielding, 13:36
[AMPS] misc topics, John Lyles, 13:03
[AMPS] Instant ON.., Peter Sundberg, 12:48
[AMPS] Ryker may have caused the SB-220 failure, Phil T. (VE3OZZ), 12:26
[AMPS] SB-220 resistor, Phil T. (VE3OZZ), 12:07
[AMPS] Follow Up on the SB-220 Follow UP, Peter Chadwick, 12:07
[AMPS] Follow Up on the SB-220 Follow UP, Jon Ogden, 12:06
[AMPS] More on the SB220, km1h@juno.com, 12:04
[AMPS] More on the SB220, km1h@juno.com, 12:01
[AMPS] Chokes and Dipping chokes?, km1h@juno.com, 11:55
[AMPS] More on the SB220, Rich Measures, 11:51
[AMPS] Follow Up on the SB-220 Follow UP, Rich Measures, 11:51
[AMPS] Follow Up on the SB-220 Follow UP, km1h@juno.com, 11:32
Fwd: Re: [AMPS] More on the SB220, Jon Ogden, 11:17
[AMPS] HV connectors again..., km1h@juno.com, 11:13
[AMPS] strange idling current, Peter Chadwick, 10:54
[AMPS] More on the SB220, Jon Ogden, 10:51
[AMPS] More on the SB220, Peter Chadwick, 10:48
[AMPS] Follow Up on the SB-220 Follow UP, Jon Ogden, 10:33
[AMPS] More on the SB220, Walter Fairclough, 10:31
[AMPS] Follow Up on the SB-220 Follow UP, Jon Ogden, 10:27
[AMPS] Chokes and Dipping chokes?, Jon Ogden, 10:17
[AMPS] Chokes and Dipping chokes?, km1h@juno.com, 10:13
[AMPS] frozen beer, Peter Chadwick, 09:32
[AMPS] frozen beer, Phil T. (VE3OZZ), 09:09
[AMPS] Chokes and Dipping chokes?, Rich Measures, 07:04
[AMPS] Follow Up on the SB-220 Follow UP, Rich Measures, 07:04
[AMPS] Instant ON.., Bill Henderson, 06:16
[AMPS] strange idling current, Peter Chadwick, 05:36
[AMPS] CW amplifier progress (well, daydream progress) -- long, Peter Chadwick, 04:05
[AMPS] HV connectors again..., Peter Chadwick, 03:52
[AMPS] CW amplifier progress (well, daydream progress) -- long, Steve Thompson, 02:55
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Steve Thompson, 02:47
[AMPS] Drake info., Steve Thompson, 02:05
[AMPS] 3D22A tube data, Bill Henderson, 00:55

March 17, 1999

[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Bill Henderson, 23:06
[AMPS] Follow Up on the SB-220 Follow UP, Walter Fairclough, 22:41
[AMPS] strange idling current, <dick.green@valley.net (Dick Green), 22:31
[AMPS] Chokes and Dipping chokes?, k6ll@juno.com, 21:49
[AMPS] Chokes and Dipping chokes?, Richard W. Ehrhorn, 19:20
[AMPS] HV connectors again..., John / NS1Z, 18:54
[AMPS] CW amplifier progress (well, daydream progress) --long, Larry Molitor, 18:30
[AMPS] MS Office 97, RICHARD W SOLOMON, 18:23
[AMPS] Corrected Amp Pics, Jon Ogden, 18:06
[AMPS] Corrected Amp Pics, Graham Jones, 16:43
[AMPS] CW amplifier progress (well, daydream progress), George K. Watson, 15:53
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, George K. Watson, 15:48
[AMPS] Corrected Amp Pics, Ian White, G3SEK, 15:18
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Radiodan W7RF, 14:42
[AMPS] CW amplifier progress (well, daydream progress) -- long, Kenneth D. Grimm, K4XL, 14:31
[AMPS] Excel 9x, Rich Measures, 12:14
[AMPS] Chokes and Dipping chokes?, Rich Measures, 11:53
[AMPS] SB-220 Follow UP, Walter Fairclough, 11:44
[AMPS] Re:3D22, Phil T. (VE3OZZ), 11:41
[AMPS] Chokes and Dipping chokes?, Rich Measures, 11:38
[AMPS] Excel 9x, Jon Ogden, 11:33
[AMPS] Chokes and Dipping chokes?, Jon Ogden, 11:31
[AMPS] Excel 9x, Cliff Frescura K3LL, 11:16
[AMPS] Excel 9x, Rich Measures, 11:08
[AMPS] Excel 9x, Cliff Frescura K3LL, 10:48
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Jon Ogden, 10:39
[AMPS] Hearter Warm-up Times ..., Joe Subich, W8IK/4, 10:38
[AMPS] CW amplifier progress (well, daydream progress) -- long, Peter Chadwick, 10:15
[AMPS] Re: [Amps] CW Amplifier progress (well, daydream progress) -- long, km1h@juno.com, 10:14
[AMPS] Instant On (was CW amplifier progress), <dick.green@valley.net (Dick Green), 10:06
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Rich Measures, 10:06
[AMPS] Corrected Amp Pics, Rich Measures, 10:05
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Rich Measures, 10:05
[AMPS] CW amplifier progress (well, daydream progress) -- long, Kenneth D. Grimm, K4XL, 10:02
[AMPS] CW amplifier progress, km1h@juno.com, 09:55
[AMPS] Chokes and Dipping chokes?, km1h@juno.com, 09:30
[AMPS] CW amplifier progress, km1h@juno.com, 09:09
[AMPS] CW amplifier progress (well, daydream progress) -- long, Peter Chadwick, 08:25
[AMPS] CW amplifier progress (well, daydream progress) -- long, Peter Chadwick, 08:09
[AMPS] Corrected Amp Pics, Ian White, G3SEK, 02:44
[AMPS] Corrected Amp Pics, Jon Ogden, 00:32

March 16, 1999

[AMPS] need tube data, Bill Henderson, 23:15
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Bill Henderson, 23:00
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Doug Hall, 20:02
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Mark S Graalman, 19:13
[AMPS] Richardsons/national/tubes, Bill Murphy, 19:03
[AMPS] 4-1000A RF Amplifier, John R Bookout K7JB, 18:14
[AMPS] Tubes for QRO, Rich Measures, 17:48
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Terry Gaiser, 15:07
[AMPS] strange idling current, John T. M. Lyles, 12:35
[AMPS] Re: [Amps] CW Amplifier progress (well, daydream progress) -- long, Vic Rosenthal, 11:01
[AMPS] Tubes for QRO, Jon Ogden, 10:55
[AMPS] Tubes for QRO, Rich Measures, 10:49
[AMPS] CW amplifier progress (well, daydream progress) -- long, Mark Hall, 08:19
[AMPS] Tubes for QRO, Mark Hall, 08:15
[AMPS] Amp pics available!, Jon Ogden, 08:05
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Kenneth D. Grimm, K4XL, 07:56
[AMPS] Tubes for QRO, Jon Ogden, 07:26
[AMPS] CW amplifier progress (well, daydream progress) -- long, W8AV@aol.com, 07:17
[AMPS] CW amplifier progress (well, daydream progress) -- lon g, Rich Measures, 07:03
[AMPS] CW amplifier progress (well, daydream progress) -- long, Peter Chadwick, 05:30
[AMPS] strange idling current, Peter Chadwick, 04:01
[AMPS] Chokes and Dipping chokes?, Rich Measures, 03:55

March 15, 1999

[AMPS] CW amplifier progress (well, daydream progress) -- long, Vic Rosenthal, 23:18
[AMPS] CW amplifier progress (well, daydream progress) -- long, Radiodan W7RF, 20:25
[AMPS] CW amplifier progress (well, daydream progress) -- long, Radiodan W7RF, 20:22
[AMPS] CW amplifier progress (well, daydream progress) -- long, km1h@juno.com, 19:50
[AMPS] CW amplifier progress (well, daydream progress) -- long, km1h@juno.com, 19:23
[AMPS] 87A Ip Meter Problem (long), <dick.green@valley.net (Dick Green), 19:19
[AMPS] Chokes and Dipping chokes?, km1h@juno.com, 19:03
[AMPS] strange idling current, <dick.green@valley.net (Dick Green), 18:50
[AMPS] CW amplifier progress (well, daydream progress) -- long, Michael J. Baker, 18:27
[AMPS] Chokes and Dipping chokes?, km1h@juno.com, 18:02
[AMPS] KE9NA's successful PA, Jon Ogden, 17:48
FW: [AMPS] 87A Ip Meter Problem (long), km1h@juno.com, 17:32
[AMPS] CW amplifier progress (well, daydream progress) -- long, Vic Rosenthal, 17:29
[AMPS] Chokes and Dipping chokes?, Rich Measures, 17:16
FW: [AMPS] 87A Ip Meter Problem (long), Rich Measures, 17:16
FW: [AMPS] 87A Ip Meter Problem (long), Richard W. Ehrhorn, 13:57
[AMPS] IT WORKS!!!, Ian White, G3SEK, 13:40
[AMPS] strange idling current, John T. M. Lyles, 13:31
[AMPS] Chokes and Dipping chokes?, Richard W. Ehrhorn, 13:08
[AMPS] KE9NA's successful PA, John T. M. Lyles, 12:39
[AMPS] 87A Ip Meter Problem (long), Rich Measures, 12:38
[AMPS] Output power 8877, Jon Ogden, 11:43
[AMPS] Output power 8877, Joe Subich, W8IK/4, 11:19
[AMPS] 87A Ip Meter Problem (long), <dick.green@valley.net (Dick Green), 10:32
[AMPS] Output power 8877, Jon Ogden, 10:04
[AMPS] IT WORKS!!!, Jon Ogden, 09:56
[AMPS] IT WORKS!!!, Rich Measures, 09:52
[AMPS] Output power 8877, km1h@juno.com, 09:30
[AMPS] Re: Solenoid Chokes, km1h@juno.com, 09:27
[AMPS] Output power 8877, km1h@juno.com, 08:57
[AMPS] 4-400As vs. 3-500Zs, Peter Chadwick, 08:24
[AMPS] Output power 8877, Roy Koeppe, 08:20
[AMPS] 4-400As vs. 3-500Zs, Peter Chadwick, 05:32
[AMPS] 4-400As vs. 3-500Zs, f117ab@ameritech.net, 05:19
[AMPS] IT WORKS!!!, Ian White, G3SEK, 02:21
[AMPS] 87A Ip Meter Problem (long), Rich Measures, 01:48
[AMPS] Chokes and Dipping chokes?, Rich Measures, 01:48
[AMPS] toroid winding and rebuilding a Vac Variable, Skip S Isaham, 00:00

March 14, 1999

[AMPS] Wanted 250/300 PF Vacuum Cap, Arthur Moe, 23:54
[AMPS] 4-400As vs. 3-500Zs, zeitler@ibm.net, 22:36
[AMPS] IT WORKS!!!, Richard W. Ehrhorn, 21:46
[AMPS] Chokes and Dipping chokes?, Richard W. Ehrhorn, 21:31
[AMPS] 87A Ip Meter Problem (long), <dick.green@valley.net (Dick Green), 20:11
[AMPS] Re: 8K?, Jim Reid, 19:50
[AMPS] tube and switch question, Ron Rollinson, 17:38
[AMPS] 3CX800A7 plate current leakage, <dick.green@valley.net (Dick Green), 17:23
[AMPS] Re: IT WORKS!!!, Roy Koeppe, 16:53
[AMPS] Output power 8877, Roy Koeppe, 14:59
[AMPS] Plate Solenoid Chokes, Jon Ogden, 14:28
[AMPS] Output power 8877, NI4L, 12:49
[AMPS] Eimac chimney available, gdaught6@leland.Stanford.EDU, 12:01
[AMPS] Ripple Current etc in FWD circuits, Phil T. (VE3OZZ), 11:52
[AMPS] Re: Solenoid Chokes, Roy Koeppe, 09:44
[AMPS] Plate Solenoid Chokes, km1h@juno.com, 08:40
[AMPS] YU-121 / 3CX1200D7, Rich Measures, 08:23
[AMPS] Advance relay for RF switching on HT-45, Jim Zellmer, 06:22
[AMPS] YU-121 / 3CX1200D7, KA2YKC@aol.com, 00:56
[AMPS] 3CX800A7 plate current leakage, Rich Measures, 00:31
[AMPS] 3CX800A7 plate current leakage, <dick.green@valley.net (Dick Green), 00:17

March 13, 1999

[AMPS] re: commercial plate choke, Rich Measures, 19:21
[AMPS] re: commercial plate choke, Merv Schweigert, 15:21
[AMPS] re: commercial plate choke, km1h@juno.com, 14:52
[AMPS] Plate Solenoid Chokes, Roy Koeppe, 14:40
[AMPS] Sheet Metal bending brakes, Phil T. (VE3OZZ), 10:34
[AMPS] re: commercial plate choke, Rich Measures, 09:58
[AMPS] Re: commercial plate choke, k6ll@juno.com, 05:22
[AMPS] IT WORKS!!!, Jon Ogden, 00:48

March 12, 1999

[AMPS] re: commercial plate choke, k6ll@juno.com, 21:51
[AMPS] 8877, Bill Parry, 21:35
[AMPS] 8877 pulls source?, Noll Amidzich, 21:01
[AMPS] Value of Henry 3k console???, KA2YKC@aol.com, 20:21
[AMPS] Re: Solenoid Plate Chokes, km1h@juno.com, 16:54
[AMPS] tetrode conversions/construction, km1h@juno.com, 16:00
[AMPS] WTB: HF directional coupler, km1h@juno.com, 15:46
[AMPS] Re: Solenoid Plate Chokes, Roy Koeppe, 14:56
[AMPS] toroid coil winding machines, dxs@nov.diac.com, 13:53
[AMPS] Re: Tuned Input for Clipperton, km1h@juno.com, 11:42
[AMPS] Re: Tuned Input for Clipperton, km1h@juno.com, 11:22
[AMPS] Re: Tuned Input for Clipperton, km1h@juno.com, 10:58
[AMPS] Chokes and Dipping chokes?, km1h@juno.com, 10:47
[AMPS] Re: Tuned Input for Clipperton, Peter Chadwick, 10:34
[AMPS] Re: Tuned Input for Clipperton, Rich Measures, 10:30
[AMPS] Chokes and Dipping chokes?, Vic Rosenthal, 10:24
[AMPS] Re: Clipperton Tuned Inputs..., Roy Koeppe, 09:44
[AMPS] Re: Tuned Input for Clipperton, Peter Chadwick, 09:16
[AMPS] Re: Tuned Input for Clipperton, km1h@juno.com, 09:11
[AMPS] Re: Tuned Input for Clipperton, William L. Fuqua III, 08:01
[AMPS] Re: Tuned Input for Clipperton, William L. Fuqua III, 07:59
[AMPS] tetrode conversions/construction, George T. Daughters, 06:16
[AMPS] Chokes and Dipping chokes?, Rich Measures, 03:58
[AMPS] Re: Tuned Input for Clipperton, Peter Chadwick, 03:50
[AMPS] Chokes and Dipping chokes?, Bill Murphy, 01:44

March 11, 1999

[AMPS] Re: Tuned Input for Clipperton, Rich Measures, 18:41
[AMPS] PCBs, Jon Ogden, 18:02
[AMPS] PCBs, Richard W. Ehrhorn, 17:43
[AMPS] Re: Tuned Input for Clipperton, Steve Iezzi, 16:38
[AMPS] Re: Tuned Input for Clipperton, Jon Ogden, 16:18
[AMPS] Re: Tuned Input for Clipperton, Jon Ogden, 16:03
[AMPS] PCBs, Steve Thompson, 15:58
[AMPS] Re: Tuned Input for Clipperton, Roy Koeppe, 15:28
[AMPS] commercial plate choke, km1h@juno.com, 13:14
[AMPS] FS: AL-1200, Terry Gaiser, 13:05
[AMPS] Ripple Current, km1h@juno.com, 12:23
[AMPS] Re:Grounded-Grid Efficiency, Peter Chadwick, 10:50
[AMPS] Re:Grounded-Grid Efficiency, Mihail Mateescu, 10:39
[AMPS] Ripple Current, Rich Measures, 10:30
[AMPS] Grounded-Grid Efficiency, Peter Chadwick, 10:29
[AMPS] Grounded-Grid Efficiency, Jon Ogden, 10:23
[AMPS] Ripple Current, Peter Chadwick, 09:37
[AMPS] PCBs, Phil T. (VE3OZZ), 09:18
[AMPS] PCBs, Peter Chadwick, 06:31
[AMPS] Henry amp debate, Ron Rollinson, 00:31
[AMPS] commercial plate choke, k6ll@juno.com, 00:05

March 10, 1999

[AMPS] Line Wiring -- resolution, <dick.green@valley.net (Dick Green), 18:23
[AMPS] Tuned Input Circuit for Clipperton L, Roy Koeppe, 17:03
[AMPS] Tuned Input Circuit for Clipperton L, Steve Iezzi, 15:07
[AMPS] Transformers, Jon Ogden, 15:00
[AMPS] WTB: Rugged, Reliable Amp, km1h@juno.com, 14:55
[AMPS] Transformers, km1h@juno.com, 14:45
[AMPS] Transformers, Rich Measures, 14:37
[AMPS] Transformers, km1h@juno.com, 14:04
[AMPS] Line Wiring again -- subpanels?, Bill Henderson, 11:06
[AMPS] Transformers, km1h@juno.com, 10:49
[AMPS] Fwd: For Sale: Henry 2002-A, Jon Ogden, 10:14
[AMPS] variable vacuum capacitors for sale, Remigijus, 07:14
[AMPS] ripple current, Steve Thompson, 02:30
[AMPS] chokes and Xfmrs, John Lyles, 01:20
[AMPS] Re: Congratulations!, Jim Reid, 00:04

March 09, 1999

[AMPS] Transformers/ My new Henry Amps, Jon Ogden, 23:50
[AMPS] Line Wiring again -- subpanels?, Jim Smith, 23:41
[AMPS] Transformers, Rich Measures, 23:08
[AMPS] Transformers/ My new Henry Amps, Radiodan W7RF, 21:40
[AMPS] Transformers, Pat Poirier, 20:11
[AMPS] Re: Sub-panels, <dick.green@valley.net (Dick Green), 20:02
[AMPS] Line Wiring again -- subpanels?, <dick.green@valley.net (Dick Green), 20:01
[AMPS] Line Wiring again -- subpanels?, <dick.green@valley.net (Dick Green), 19:53
[AMPS] Line Wiring again -- subpanels?, <dick.green@valley.net (Dick Green), 19:12
[AMPS] Warc bands 12/17/30M on Yeasu FL 2100B., Theo Koning, 17:43
[AMPS] Ripple Current, Joe Subich, W8IK/4, 17:42
[AMPS] Ripple Current, Steve Thompson, 15:54
[AMPS] Ripple Current, km1h@juno.com, 15:29
[AMPS] Transformers, Radiodan W7RF, 13:06
[AMPS] Line Wiring again -- subpanels?, Jim Smith, 12:45
[AMPS] Transformers, Peter Chadwick, 11:58
[AMPS] Transformers, Peter Chadwick, 11:44
[AMPS] Transformers, km1h@juno.com, 11:43
[AMPS] Line Wiring again -- subpanels?, Rich Measures, 11:38
[AMPS] Transformers, Rich Measures, 11:38
[AMPS] Transformers, Rich Measures, 11:38
[AMPS] Transformers, km1h@juno.com, 10:57
[AMPS] 8877 pulls source?, Jon Ogden, 09:55
[AMPS] Schematic for Clipperton V, John / NS1Z, 05:35
[AMPS] Re:, Ian White, G3SEK, 04:41
[AMPS] Transformers, Peter Chadwick, 04:02
[AMPS] specs on vac var. cap, Peter Chadwick, 03:40
[AMPS] Transformers, Radiodan W7RF, 02:36
[AMPS] Line Wiring again -- subpanels?, <dick.green@valley.net (Dick Green), 02:16
[AMPS] Transformers, Rich Measures, 01:42
No subject, John Lyles, 01:39

March 08, 1999

[AMPS] Dahl vs. bucks, Alan Gray, 20:59
[AMPS] Transformers, Pat Poirier, 20:20
[AMPS] Dahl vs. bucks, Paul Hicks, VE3BBH / VE3ZT, 20:12
[AMPS] 8877 pulls source?, LEE ROGER WICAL, 19:29
[AMPS] Transformers, km1h@juno.com, 16:23
[AMPS] Transformers, Alan Gray, 13:09
[AMPS] specs on vac var. cap, W6NQ, 12:09
[AMPS] Transformers, km1h@juno.com, 10:51
[AMPS] 8877 pulls source?, Vic Rosenthal, 10:51
[AMPS] FL-2100B blown bandswitch in 80M position, km1h@juno.com, 10:39
[AMPS] Dahl vs. bucks, zeitler@ibm.net, 08:43
[AMPS] ripple current, William L. Fuqua III, 07:45
[AMPS] Transformers, Alan D. Gray, 07:02
[AMPS] Please ignore, Mihail Mateescu, 05:34
[AMPS] FL-2100B blown bandswitch in 80M position, Rich Measures, 05:08
[AMPS] ripple current, Peter Chadwick, 04:18
[AMPS] Acom 2000A amp by Finnfet?, George T. Daughters, 03:31
[AMPS] ripple current, Steve Thompson, 03:10
[AMPS] FL-2100B blown bandswitch in 80M position, K7NT@aol.com, 03:08
[AMPS] Acom 2000A amp by Finnfet?, Morel Grunberg, 00:44
[AMPS] Transformers, Radiodan W7RF, 00:27

March 07, 1999

[AMPS] Transformers, zeitler@ibm.net, 22:00
[AMPS] Transformers, Radiodan W7RF, 21:56
[AMPS] Transformers, zeitler@ibm.net, 21:31
[AMPS] Acom 2000A amp by Finnfet?, Barry Kutner, 19:50
[AMPS] Acom 2000A amp by Finnfet?, Paul Christensen, 19:28
[AMPS] Acom 2000A amp by Finnfet?, Barry Kutner, 19:11
[AMPS] Alden Connectors, john merryman, 18:07
[AMPS] Variac addendum, km1h@juno.com, 15:01
[AMPS] Transformers, km1h@juno.com, 14:53
[AMPS] Alpha 87A, Paul Christensen, 14:38
[AMPS] Variac, Rich Measures, 13:57
[AMPS] Variac addendum, Shane KI4M/KV4I, 13:56
[AMPS] Variac, Shane KI4M/KV4I, 13:41
[AMPS] Ripple current ratings of high voltage caps., km1h@juno.com, 10:34
[AMPS] Drake L4B RF deck $300.00, zeitler@ibm.net, 09:55
[AMPS] Ripple current ratings of high voltage caps., John Fielding, 02:55

March 06, 1999

[AMPS] Re: Ripple current/cap specs, Phil T. (VE3OZZ), 20:48
[AMPS] Ripple current ratings of high voltage caps., Rich Measures, 19:40
[AMPS] need plate transformer, Rich Measures, 19:40
[AMPS] Search, Rich Measures, 19:40
[AMPS] Transformers, km1h@juno.com, 17:45
[AMPS] Ripple current ratings of high voltage caps., km1h@juno.com, 17:35
[AMPS] professional glass blowers, km1h@juno.com, 17:31
[AMPS] need plate transformer, Paul Hicks, VE3BBH / VE3ZT, 16:52
[AMPS] Ripple current ratings of high voltage caps., Jon Ogden, 16:23
[AMPS] Search, marv gonsior, 15:12
[AMPS] need plate transformer, Dick McDuffie, 13:16
[AMPS] Ripple current ratings of high voltage caps., John Fielding, 13:00
[AMPS] professional glass blowers, Ian White, G3SEK, 11:54
[AMPS] need plate transformer, Dick McDuffie, 11:20
[AMPS] Sanyo capacitors, John Fielding, 07:36
[AMPS] Ripple current ratings of high voltage caps., Ian White, G3SEK, 03:27

March 05, 1999

[AMPS] SSB book, Phil T. (VE3OZZ), 21:28
[AMPS] Transformer, Phil T. (VE3OZZ), 21:00
[AMPS] Ripple current ratings of high voltage caps., km1h@juno.com, 18:51
[AMPS] Transformer, Alek Petkovic, 18:47
[AMPS] ripple current, km1h@juno.com, 18:41
[AMPS] Ripple current ratings of high voltage caps., Rich Measures, 18:31
[AMPS] what should I replace ps caps with?, km1h@juno.com, 18:21
[AMPS] Ripple current ratings of high voltage caps., Jon Ogden, 17:05
[AMPS] ripple current, William L. Fuqua III, 16:49
[AMPS] New 572B's needed Any thought of what Brand?, km1h@juno.com, 16:38
[AMPS] professional glass blowers, km1h@juno.com, 15:57
[AMPS] Ripple current ratings of high voltage caps., km1h@juno.com, 15:24
[AMPS] Ripple current ratings of high voltage caps., km1h@juno.com, 15:13
[AMPS] Nichicon, km1h@juno.com, 14:59
[AMPS] TUBE 7537 = 572B ??, Oscar, 14:45
[AMPS] what should I replace ps caps with?, Ron Rollinson, 13:51
[AMPS] Ripple current ratings of high voltage caps., Phil T. (VE3OZZ), 13:48
[AMPS] Ripple current ratings of high voltage caps., Phil T. (VE3OZZ), 13:43
[AMPS] Ripple current ratings of high voltage caps., km1h@juno.com, 11:36
[AMPS] Nichicon Caps, km1h@juno.com, 11:31
[AMPS] New 572B's needed Any thought of what Brand?, Rich Measures, 09:57
[AMPS] New 572B's needed Any thought of what Brand?, Scott Gordon, 08:18
[AMPS] Amp Supply-Omega Electronics, Greg Gobleman, 06:47
[AMPS] Amp Supply-Omega Electronics, Miguel Valdes EA1KI, 05:51
[AMPS] Ripple current ratings of high voltage caps., John Nelson, 05:09
[AMPS] professional glass blowers, Skip S Isaham, 02:13

March 04, 1999

[AMPS] Ripple current ratings of high voltage caps., Jon Ogden, 23:41
[AMPS] Ripple current ratings of high voltage caps., Rich Measures, 21:02
[AMPS] Ripple current ratings of high voltage caps., Phil T. (VE3OZZ), 19:00
[AMPS] Nichicon, Dick Hanson, 16:33
[AMPS] Properties of nylon?, Mark S Graalman, 15:59
[AMPS] Care and Feeding etc., John Nelson, 14:56
[AMPS] Care and Feeding etc., John Fielding, 12:56
[AMPS] Ripple current ratings of high voltage caps., Rich Measures, 12:22
[AMPS] Properties of nylon?, Fraser Robertson, 12:03
[AMPS] Ripple current ratings of high voltage caps., John Fielding, 11:40
[AMPS] more poor mans chimneys and glassware, Phil T. (VE3OZZ), 09:55
[AMPS] Meters, Paul Hellenberg K4JA, 08:52
[AMPS] Nichicon Caps, Ian White, G3SEK, 03:47
[AMPS] more poor mans chimneys and glassware, Ian White, G3SEK, 03:44
[AMPS] parts for sale, Remigijus, 03:33
[AMPS] more poor mans chimneys and glassware, <dx@swipnet.se (Thomas Bevenheim), 00:59
[AMPS] 3-500 temp indicator paint., Skip S Isaham, 00:35
[AMPS] more poor mans chimneys and glassware, Skip S Isaham, 00:35

March 03, 1999

[AMPS] Care and feeding of your Eimac 3-500, David A. Pruett, 22:46
[AMPS] YC-156, Bob Marston, 22:25
[AMPS] Blowers, meters, Phil T. (VE3OZZ), 20:40
[AMPS] Care and feeding of your Eimac 3-500, Phil T. (VE3OZZ), 20:40
[AMPS] Care and feeding of your Eimac 3-500, Ian White, G3SEK, 14:39
[AMPS] Big Amp Wanted, Stan Hill, 13:05
[AMPS] 3-500Z Datasheet, Radio WC6W, 11:58
[AMPS] Care and feeding of your Eimac 3-500, Jon Ogden, 11:50
[AMPS] Nichicon Caps, km1h@juno.com, 11:36
[AMPS] Care and feeding of your Eimac 3-500, Joe Subich, W8IK/4, 11:32
[AMPS] Care and feeding of your Eimac 3-500, Peter Chadwick, 11:29
[AMPS] My dentron 160-10L, km1h@juno.com, 11:16
[AMPS] Care and feeding of your Eimac 3-500, Rich Measures, 10:50
[AMPS] Kenwood TL-922A Grid Current, km1h@juno.com, 10:22
[AMPS] Care and feeding of your Eimac 3-500, Ian White, G3SEK, 09:29
[AMPS] 3-500Z Specs, Terry Gaiser, 08:29
[AMPS] YC-156, Rich Measures, 07:17
[AMPS] Care and feeding of your Eimac 3-500, Rich Measures, 07:17
[AMPS] Kenwood TL-922A Grid Current, Rich Measures, 07:17
[AMPS] Nichicon Caps, Warren J. Walsh, 07:17
[AMPS] 3-500Z chimneys, Steve Thompson, 04:12
[AMPS] Care and feeding of your Eimac 3-500, Peter Chadwick, 03:57
[AMPS] screen regulators, Peter Chadwick, 03:51
[AMPS] Screen stabilization in 30S-1?, Ian White, G3SEK, 02:26
[AMPS] My dentron 160-10L, Ron Rollinson, 01:04
[AMPS] PCB relays in Input networks, Morel Grunberg, 00:54
[AMPS] Nichicon Caps, W6NQ, 00:15

March 02, 1999

[AMPS] Re: Amps Digest V2 #89, Charles R Constantine, 23:35
[AMPS] Kenwood TL-922A Grid Current, KA2YKC@aol.com, 23:05
[AMPS] Kenwood TL-922A Grid Current, Jeff Weinberg W8CQ, 22:19
[AMPS] Screen stabilization in 30S-1?, km1h@juno.com, 22:08
[AMPS] Blowers, meters, km1h@juno.com, 22:00
[AMPS] trouble with Dentron GLA-1000, Skip S Isaham, 21:57
[AMPS] replacing wimpy L4B blower, km1h@juno.com, 21:31
[AMPS] Re: Blower, km1h@juno.com, 21:30
[AMPS] Kenwood TL-922A Grid Current, km1h@juno.com, 21:18
[AMPS] Care and feeding of your Eimac 3-500, Jon Ogden, 20:17
[AMPS] Tube rating question, km1h@juno.com, 20:12
[AMPS] YC-156, km1h@juno.com, 20:09
[AMPS] Kenwood TL-922A Grid Current, Jeff Weinberg W8CQ, 19:56
[AMPS] Need Bird 2500C slug, Bob Dodson WB5APD EM84ak, 19:56
[AMPS] Tube rating question, km1h@juno.com, 19:47
[AMPS] YC156 whats the point, km1h@juno.com, 19:22
[AMPS] poor mans chimneys, km1h@juno.com, 19:22
[AMPS] YC-156, km1h@juno.com, 19:21
[AMPS] YC-156, km1h@juno.com, 19:21
[AMPS] 3-500Z chimneys, km1h@juno.com, 18:35
[AMPS] PCB relays in Input networks, km1h@juno.com, 18:12
[AMPS] 3-500Z chimneys, km1h@juno.com, 17:47
[AMPS] Ig, Larry Molitor, 17:38
[AMPS] 3-500Z Datasheet, Phil T. (VE3OZZ), 17:01
[AMPS] Care and feeding of your Eimac 3-500, Len Schaier, 16:56
[AMPS] screen regulators, Steve Thompson, 15:51
[AMPS] surplus 6 meter deck, John T. M. Lyles, 13:56
[AMPS] Nichicon Capacitors?, Warren J. Walsh, 12:33
[AMPS] YC156 whats the point, Rich Measures, 12:19
[AMPS] Dentron GLA-1000, km1h@juno.com, 12:16
[AMPS] Nichicon Capacitors?, km1h@juno.com, 12:13
[AMPS] 3-500Z Datasheet, Vic Rosenthal, 11:57
[AMPS] YC156 whats the point, Richard W. Ehrhorn, 11:47
[AMPS] WTB: SB-220, etc, km1h@juno.com, 11:46
[AMPS] YC156 whats the point, km1h@juno.com, 11:39
[AMPS] SB220 Xformer labodomy-cont'd, Len Schaier, 09:13
[AMPS] 3-500Z Datasheet, Warren J. Walsh, 08:44
[AMPS] screen regulators, Rich Measures, 06:15
[AMPS] screen regulators, Steve Thompson, 03:26
[AMPS] 3cx800's, tom hix, 00:45

March 01, 1999

[AMPS] SB220 Xformer labodomy-cont'd, Rich Measures, 20:27
[AMPS] AC rating vs. DC rating on caps., W6NQ, 19:38
[AMPS] Ig, f117ab@ameritech.net, 18:32
[AMPS] Nichicon Capacitors?, George McCrary, 16:55
[AMPS] Dentron GLA-1000, Mark A. Mowery, 16:14
[AMPS] SB220 Xformer labodomy-cont'd, Len Schaier, 16:12
[AMPS] SB220 Xformer labodomy-cont'd, Rich Measures, 15:07
[AMPS] SB220 Xformer labodomy-cont'd, Len Schaier, 13:43
[AMPS] screen regulators, Rich Measures, 13:02
[AMPS] screen regulators, Peter Chadwick, 08:52
[AMPS] Re: Blower, Peter Chadwick, 05:25