I have a couple of Amidon R33-050-750 ferrite rods. They are 1/2" x 7-1/2" in
size. They make these rods with R33 and R61 material; the R33 has a
permeability of 800 and the R61 of 125.
My question is: can I use the R33 rods for filament chokes at 1.8-30 mHz?
Amidon says in their booklet "CHOKE APPLICATIONS: ...the #33 material should be
selected for 40 and 80 meter bands and the #61 material is most suitable for 10
through 40 meters"
Has anyone made filament chokes using these rods, and if so which material did
they use?
73,
Vic, K2VCO
Fresno CA
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|